OAK FOREST, IL —
OSHA Inspection: STACK DEVELOPMENT, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of STACK DEVELOPMENT, INC. in 5900 W. 159TH STREET, OAK FOREST, IL 60452 (NAICS 238140). OSHA activity number 340576057.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STACK DEVELOPMENT, INC.
- Site address
- 5900 W. 159TH STREET
- City
- OAK FOREST
- State
- IL
- ZIP
- 60452
- Mailing
- 5900 W. 159TH STREET, OAK FOREST, IL 60452
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 7
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.20 B01
- Issued
- Jun 19, 2015
- Abate by
- Aug 17, 2015
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part. a. On or about April 21, 2015 - at the above addressed jobsite, the employer did not initiate and maintain an accident prevention program and/or safety and health program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to falls and electrical hazards.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1926.503 A01
- Issued
- Jun 19, 2015
- Abate by
- Aug 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. a. On or about April 21, 2015 - at the above addressed jobsite, the employer failed to provide a training program for each employee who might be exposed to fall hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.403 I02 I
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $2,400 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.403(i)(2)(i): Except as required or permitted elsewhere in this subpart, live parts of electric equipment operating at 50 volts or more shall be guarded against accidental contact by cabinets or other forms of enclosures, or by any of the following means: a. On or about April 21, 2015 - at the above addressed jobsite, employees and subcontractor employees were walking/working around exposed live electrical wires hanging from ceiling lamps and the old ceiling grid, thereby exposing the employees to electrical hazards. b. On or about April 21, 2015 - at the above addressed jobsite, employees and subcontractor employees were plugging in electrical equipment/tools in to live exposed electrical outlets that had damaged covers or face plates to protect against accidental contact, thereby exposing the employees to electrical hazards.
Recent events (2)
- — I (S) $1500
- — Z (S) $2400
1926.405 B02
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(b)(2): Covers and canopies. All pull boxes, junction boxes, and fittings shall be provided with covers. If metal covers are used, they shall be grounded. In energized installations each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear. a. On or about April 21, 2015 - at the above addressed jobsite, a live electrical panel was not protected with a cover, thereby exposing employees to arc flash/blast hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B01
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $2,800 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. a. On or about April 21, 2015 - at the above addressed jobsite, an employee performing carpentry operations from a mezzanine, approximately ten (10) feet three (3) inches above the ground was not protected from falls, thereby exposing the employee to fall hazards.
Recent events (2)
- — I (S) $1500
- — Z (S) $2800
1926.502 I03
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $1,600 · Current $900 Reduced
General-duty citation text
29 CFR 1926.502(i)(3): All covers shall be secured when installed so as to prevent accidental displacement by the wind, equipment, or employees. a. On or about April 21, 2015 - at the above addressed jobsite, on the mezzanine, the plywood used to cover the floor hole was not secured as to prevent accidental displacement, thereby exposing employees and subcontractor employees to falls.
Recent events (2)
- — I (S) $900
- — Z (S) $1600
1926.502 I04
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(i)(4): All covers shall be color coded or they shall be marked with the word "HOLE" or "COVER" to provide warning of the hazard. a. On or about April 21, 2015 - at the above addressed jobsite, on the mezzanine, the hole cover was not marked with the word "HOLE" or "COVER" to provide warning of the hazard, thereby exposing employees and subcontractor employees to falls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Stack Development, INC.
View Stack Development, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340576057.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.