NEW YORK, NY —
OSHA Inspection: KENRY CONTRACTING INC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of KENRY CONTRACTING INC in 219 EAST 44TH STREET, NEW YORK, NY 10031 (NAICS 238140). OSHA activity number 340584325.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KENRY CONTRACTING INC
- Site address
- 219 EAST 44TH STREET
- City
- NEW YORK
- State
- NY
- ZIP
- 10031
- Mailing
- 9 CENTRAL PARK AVE, YONKERS, NY 10705
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 35
- Ownership type
- A
Citations
3 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 21, 2015
- Abate by
- Nov 2, 2015
- Penalty
- Initial $7,000 · Current $6,300 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): : The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to crush injuries. On or about April 24, 2015 Location: 219 East 44th Street, New York, NY a) Employees were working next to the Haib 377 E5 Hipro Knuckle Boom Crane when maintenance was being done and an energy control program was not implemented to control the release of stored energy. As the maintenance was being completed the boom pinned an employee to the cab of the crane. Among other feasible and useful methods to correct the hazard: In accordance with the ANSI A10.44 section 3.1 The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. Or In the Alternative: 29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.
Recent events (2)
- — I (S) $6300
- — Z (S) $7000
1926.1412 F01
- Issued
- Oct 21, 2015
- Abate by
- Nov 2, 2015
- Penalty
- Initial $6,930 · Current $5,650 Reduced
General-duty citation text
29 CFR 1926.1412(f)(1): 29 CFR 1926.1412(f)(1): The equipment was not inspected at least every 12 months by a qualified person in accordance with paragraph (d) of this section. On or about April 24, 2015 Location: 219 East 44th Street, New York, NY a) A Hiab Knuckle Boom crane was used prior to a comprehensive annual inspection was completed by a qualified person.
Recent events (2)
- — I (S) $5650
- — Z (S) $6930
1904.29 B01
- Issued
- Oct 21, 2015
- Abate by
- Nov 2, 2015
- Penalty
- Initial $1,100 · Current $550 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year. Location: 219 East 44th Street, New York, NY On or About April 24, 2015 A). Employer did not complete the OSHA 300 forms with the basic information required by this section. Employer did not properly note the year or the injury location or information on the form.
Recent events (2)
- — I (O) $550
- — Z (O) $1100
More inspections at Kenry Contracting INC
View Kenry Contracting INC's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340584325.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.