ARGYLE, NY —
OSHA Inspection: CREATIVE STONE DESIGNS, LLC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of CREATIVE STONE DESIGNS, LLC. in 218 GILCHRIST ROAD, ARGYLE, NY 12809 (NAICS 238140). OSHA activity number 340590546.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREATIVE STONE DESIGNS, LLC.
- Site address
- 218 GILCHRIST ROAD
- City
- ARGYLE
- State
- NY
- ZIP
- 12809
- Mailing
- 218 GILCHRIST ROAD, ARGYLE, NY 12809
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 18
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C01
- Issued
- Jul 15, 2015
- Abate by
- Aug 19, 2015
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): In the workplace where respirators were necessary to protect the health of the employee or where respirators were required by the employer, the employer did not establish and implement a written respiratory protection program with worksite-specific procedures including the provisions (i)-(ix) of this section, as applicable: (a) On or about 4/28/2015, at the jobsite, for the tender wearing a 3M N95 respirator while making mud. The employer did not implement a worksite-specific respiratory protection program. Abatement Note: The Respiratory Protection Program shall include the following sections: (1) Procedures for selecting respirators for use in the workplace; (2) Medical evaluations of employees required to use respirators; (3) Fit testing procedures for tight-fitting respirators; (4) Procedures for proper use of respirators in routine and reasonably foreseeable emergency situations; (5) Procedures and schedules for cleaning, disinfecting, storing, inspecting, repairing, discarding, and otherwise maintaining respirators; (6) Procedures to ensure adequate air quality, quantity, and flow of breathing air for atmosphere- supplying respirators (if used); (7) Training of employees in the respiratory hazards to which they are potentially exposed during routine and emergency situations; (8) Training of employees in the proper use of respirators, including putting on and removing them, any limitations on their use, and their maintenance; and (9) Procedures for regularly evaluating the effectiveness of the program.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.134 K01 I
- Issued
- Jul 15, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1)(i): The employer did not ensure that each employee can demonstrate knowledge of why the respirator was necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator: (Construction Reference 1926.103) (a) On or about 4/28/2015, at the jobsite, for tender wearing a 3M N95 respirator while making mud. The employer did not train employee on respiratory protection.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 E01
- Issued
- Jul 15, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace: (a) On or about 4/28/2015, at the jobsite, for the tender wearing a 3M N95 respirator while making mud. The employee was not provided a medical evaluation prior to being required to wear the respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1910.134 F02
- Issued
- Jul 15, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that employees using tight fitting face piece respirators pass an appropriate qualitative or quantitative fit test prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter. (a) On or about 4/28/2015, at the jobsite, for the tender wearing a 3M N95 respirator while making mud. The employee was not fit tested, either qualitatively or quantitatively, prior to being required to use this respirator by the employer.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Jul 15, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference 1926.59) (a) On and before 4/28/2015, at jobsite, for the tender making mud containing hazardous chemicals such as, but not limited to, silica dust. Employees were not provided with information and training on the hazards of the chemicals they work with or are exposed to in their work area.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.1200 H03 IV
- Issued
- Jul 15, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, including an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information: (Construction Reference 1926.59) (a) On and before 4/28/2015, at jobsite, for the tender making mud containing hazardous chemicals such as, but not limited to, silica dust. Employees were not provided with information and training on the hazards of the chemicals they work with or are exposed to in their work area.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Creative Stone Designs, LLC.
View Creative Stone Designs, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340590546.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.