DOVER, NH —
OSHA Inspection: VIGILANT INCORPORATED
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of VIGILANT INCORPORATED in 85 INDUSTRIAL PARK DR., DOVER, NH 03820 (NAICS 321999). OSHA activity number 340591239.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Vigilant Incorporated — free
Get an email when a new federal OSHA severe-injury report for Vigilant Incorporated is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- VIGILANT INCORPORATED
- Site address
- 85 INDUSTRIAL PARK DR.
- City
- DOVER
- State
- NH
- ZIP
- 03820
- Mailing
- 85 INDUSTRIAL PARK DR., DOVER, NH 03820
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 30
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.213 R04
- Issued
- Sep 21, 2015
- Abate by
- Sep 25, 2015
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of router bit: a. Shop - On or about May 7, 2015, the Porter Cable router was not provided with a bit guard.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1910.213 H01
- Issued
- Sep 21, 2015
- Abate by
- Sep 25, 2015
- Penalty
- Initial $10,780 · Current $7,700 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed: Instance a. Site - On or about April 28, 2015, an employee assigned to operate the Omca (model RN450FM "US") radial arm saw suffered a serious finger injury, while operating the saw which had not been adequately guarded. Instance b. Site - On or about April 28, 2015, the Omca (model RN450FM "US" S/N 280662) radial arm saw's blade guard was not installed correctly to allow the guard to completely enclose the rotating blade during the operation of the saw. Instance c. Site - On or about April 28, 2015, the Delta Rockwell (S/N 2556-B) radial arm saw's blade guard was not installed correctly to allow the guard to completely enclose the rotating blade during the operation of the saw. Vigilant Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.213(c)(1), which was contained in OSHA inspection number 966547, citation number 1, item number 2, and was affirmed as a final order on 5/23/2014, with respect to a workplace located at 85 Industrial Park Dr. Dover, NH.
Recent events (2)
- — I (R) $7700
- — Z (R) $10780
1910.213 H02
- Issued
- Sep 21, 2015
- Abate by
- Sep 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(2): Radial saw(s) used for ripping were not provided with nonkickback fingers or dogs located on both sides of the saw so as to oppose the trust or tendency of the saw to pick up material or throw it back toward the operator: Instance a. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 05045A) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance b. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N CD40024) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance c. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 350565) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance d. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 571317) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance e. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 640995) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance f. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 970901) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance g. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 356544) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance h. Site - On or about April 28, 2015, and May 7, 2015, the Omca (model RN450FM "US") radial arm saw was not provided with a non-kickback finger guard to prevent cut materials from being thrown backwards towards the operator. Instance i. Site - On or about April 28, 2015, and May 7, 2015, the Omca (model RN450FM "US" S/N 280662) radial arm saw was not provided with a non-kickback finger guard to prevent cut materials from being thrown backwards towards the operator. Instance j. Site - On or about April 28, 2015, and May 7, 2015, the Delta Rockwell (S/N 2556-B) radial arm saw was not provided with a non-kickback finger guard to prevent cut materials from being thrown backwards towards the operator. Vigilant Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910. 213(c)(3), which was contained in OSHA inspection number 966547, citation , number 1, item number 3a, and was affirmed as a final order on May 27, 2014, with respect to a workplace located at 85 Industrial Park Dr. Dover, NH.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at Vigilant Incorporated
View Vigilant Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 321999)
Jul 14, 2026
161549 - American Wood Fibers, INC. · LAURINBURG, NC
Jul 14, 2026
Truss Manufacturing INC · NEWINGTON, CT
Jul 7, 2026
161501 - Miller BEE Supply, INC. · NORTH WILKESBORO, NC
Jun 26, 2026
Florida Lumber Company · MIAMI, FL
Jun 25, 2026
111471 - Steve Tusha DBA Great OAK Equine · PLATO, MN
More inspections in NH
Jul 17, 2026
Star Construction SVS INC · ROCHESTER, NH
Jul 16, 2026
Omni Components Corp. · HUDSON, NH
Jul 16, 2026
Andrew Grant'S Tree Service · NEW BOSTON, NH
Jul 15, 2026
Rodas Construction Corp · PORTSMOUTH, NH
Jul 15, 2026
Knox Marsh Development LLC · DOVER, NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340591239.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.