YORK, PA —
OSHA Inspection: AESYS TECHNOLOGIES, LLC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AESYS TECHNOLOGIES, LLC. in 693 NORTH HILLS ROAD, YORK, PA 17402 (NAICS 332410). OSHA activity number 340643998.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AESYS TECHNOLOGIES, LLC.
- Site address
- 693 NORTH HILLS ROAD
- City
- YORK
- State
- PA
- ZIP
- 17402
- Mailing
- 693 NORTH HILLS ROAD, YORK, PA 17402
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332410
- Employees
- 54
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 A02
- Issued
- Nov 19, 2015
- Abate by
- Dec 9, 2015
- Penalty
- Initial $4,200 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: a) Building 8 / Bathroom area; When employees use the restroom they are exposed to a slip hazard due to standing water located in the area, on or about 05/20/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $3150
- — Z (S) $4200
1910.23 C01
- Issued
- Nov 19, 2015
- Abate by
- Dec 9, 2015
- Penalty
- Initial $4,200 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent): a) Building station area; An employee was welding pipe fittings on top of the boiler tank 6 feet 5 inches above the ground without the use of fall protection, on or about 05/20/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $3150
- — Z (S) $4200
1910.243 C03
- Issued
- Nov 19, 2015
- Abate by
- Dec 9, 2015
- Penalty
- Initial $4,900 · Current $3,675 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: a) Sub art area; An employee was using a Milwaukee 4 1/2 inch angel grinder that was not provided with a guard to grind a weld on a fire tube, on or about 05/20/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $3675
- — Z (S) $4900
More inspections in this industry (NAICS 332410)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340643998.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.