GRAYSON, GA —
OSHA Inspection: RUBEN GONZALEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RUBEN GONZALEZ in 2249 ARLINGTON WALK LANE, GRAYSON, GA 30017 (NAICS 238130). OSHA activity number 340682020.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RUBEN GONZALEZ
- Site address
- 2249 ARLINGTON WALK LANE
- City
- GRAYSON
- State
- GA
- ZIP
- 30017
- Mailing
- 2220 ATLANTA ROAD APT 19, SMYRNA, GA 30080
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.100 A
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about June 4, 2015, at Lot 41, 2249 Arlington Walk Lane, Grayson, Georgia: Three employees performing framing work were exposed to struck-by hazards from falling nail guns and lumber of the employees working above them when they worked without using head protection.
Recent events (1)
- — Z (S) $2000
1926.102 A01
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: On or about June 4, 2015, at Lot 41, 2249 Arlington Walk Lane, Grayson, Georgia: a) Two employees performing framing work were exposed to struck-by hazards from wood chips and saw dust when they used two Makita 5007F circular saws without wearing eye protection. b) Three employees performing framing work were exposed to struck-by hazards from nails and wood chips when they used nail guns without wearing eye protection.
Recent events (1)
- — Z (S) $2000
1926.300 B01
- Issued
- Aug 21, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: On or about June 4, 2015, at Lot 41, 2249 Arlington Walk Lane, Grayson, Georgia: Two employees performing framing work were exposed to amputation hazard when they used two Makita 5007F circular saws that had pieces of wood wedged against the saw blades that prevented the lower blade guard from engaging.
Recent events (1)
- — Z (S) $2000
1926.501 B13
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about June 4, 2015, at Lot 41, 2249 Arlington Walk Lane, Grayson, Georgia: Six employees performing framing work were exposed to fall hazards of up to approximately 18.8-feet when they worked form the second floor top plate and at the unprotected edge of a house without using fall protection.
Recent events (1)
- — Z (S) $2800
1926.1052 C01 I
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.1052(c)(1)(i): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail: On or about June 4, 2015, at Lot 41, 2249 Arlington Walk Lane, Grayson, Georgia: Six employees performing framing work were exposed to a fall hazard of approximately 10.1-feet when they used a stairwell that did not have hand rails installed.
Recent events (1)
- — Z (S) $2800
1926.1052 C01 II
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: On or about June 4, 2015, at Lot 41, 2249 Arlington Walk Lane, Grayson, Georgia: Six employees performing framing work were exposed to a fall hazard of up to approximately 10.1-feet when they used a stairwell that did not have a stair rail installed on the unprotected edge.
Recent events (1)
- — Z (S) $0
More inspections at Ruben Gonzalez
View Ruben Gonzalez's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340682020.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.