LANCASTER, PA —
OSHA Inspection: MAUGUS MANUFACTURING INCORPORATED
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MAUGUS MANUFACTURING INCORPORATED in 239 NORTH ANN STREET, LANCASTER, PA 17601 (NAICS 326199). OSHA activity number 340726173.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAUGUS MANUFACTURING INCORPORATED
- Site address
- 239 NORTH ANN STREET
- City
- LANCASTER
- State
- PA
- ZIP
- 17601
- Mailing
- PO BOX 4096, LANCASTER, PA 17602
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 170
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C08
- Issued
- Nov 25, 2015
- Abate by
- Dec 31, 2015
- Penalty
- Initial $3,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(8): Lockout or tagout was not performed only by the authorized employees who are performing the servicing or maintenance: (a) 239 N Ann Street, Lancaster Pennsylvania - Operators clean the Lauterbach compression molding machine. The employer did not ensure that operators placed an energy control devices on the machine during cleaning, on or about June 23, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $3600
1910.147 D04 I
- Issued
- Nov 25, 2015
- Abate by
- Dec 31, 2015
- Penalty
- Initial $0 · Current $3,600
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) 239 N Ann Street, Lancaster Pennsylvania - Employees perform servicing and maintenance on the Lauterbauch compression molding machine with such energy sources such as electrical, hydraulic, and air. The employer did not ensure that employees isolated all energy sources before performing maintenance, on or about June 23, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $3600
- — Z (S) $0
1910.212 A01
- Issued
- Nov 25, 2015
- Abate by
- Mar 30, 2017
- Penalty
- Initial $6,300 · Current $6,300
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) 239 N Ann Street, Lancaster Pennsylvania - Employees work in the area of a Lauterbach molding machine. The employer did not provide machine guarding to protect employees from point of operation and rotating parts hazards, on or about June 17, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $6300
- — Z (S) $6300
1910.145 C03
- Issued
- Nov 25, 2015
- Abate by
- Dec 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.145(c)(3): Safety instruction sign(s) were not used where there was a need for general instructions and suggestions relative to safety measure(s): (a) 239 N Ann Street, Lancaster Pennsylvania - Employees work in the area of a Lauterbach molding machine. The employer did not inform employees of the pinch point or rotating parts hazard by the posting of signs, on or about June 17, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Maugus Manufacturing Incorporated
View Maugus Manufacturing Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340726173.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.