GREENCASTLE, PA —
OSHA Inspection: LYCOMING SUPPLY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LYCOMING SUPPLY, INC. in 3572 W WEAVER ROAD (COVERED BRIDGE), GREENCASTLE, PA 17225 (NAICS 237310). OSHA activity number 340779792.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LYCOMING SUPPLY, INC.
- Site address
- 3572 W WEAVER ROAD (COVERED BRIDGE)
- City
- GREENCASTLE
- State
- PA
- ZIP
- 17225
- Mailing
- 801 BEEBER ST, WILLIAMSPORT, PA 17701
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237310
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.106 C
- Issued
- Dec 8, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $2,380 · Current $0 Reduced
General-duty citation text
29 CFR 1926.106(c): Ring buoys with at least 90 feet of line were not provided and readily available for emergency rescue operations: a) West Weaver Covered Bridge / Conococheague Creek area; Employees were performing various construction work while restoring a covered bridge without the employer having provided a ring buoy with at least 90 feet of line in the event an emergency were to occur, on or about 07/16/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (S) $2380
1926.106 D
- Issued
- Dec 8, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.106(d): A lifesaving skiff was not immediately available at locations where employees were working over or adjacent to water: a) West Weaver Covered Bridge / Conococheague Creek area; Employees were performing various construction work while restoring a covered bridge without the employer having provided a lifesaving skiff in the event an emergency were to occur, on or about 07/16/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.300 A
- Issued
- Dec 8, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $2,975 · Current $2,380 Reduced
General-duty citation text
29 CFR 1926.300(a): Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition: a) West Weaver Covered Bridge / Conococheague Creek area; Employees were operating a Husqvarna Chainsaw Model Number 455 Rancher without having a trigger safety in-place to cut lumber, on or about 07/16/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2380
- — Z (S) $2975
1926.303 B01
- Issued
- Dec 8, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $2,380 · Current $1,904 Reduced
General-duty citation text
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section: a) West Weaver Covered Bridge / Conococheague Creek area; Employees are using a Dewalt 4 1/2 inch angle grinder Model Number D28402 to cut off metal bolts. The grinder was not provided with a guard on or about 07/16/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1904
- — Z (S) $2380
1926.452 W02
- Issued
- Dec 8, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $2,380 · Current $1,904 Reduced
General-duty citation text
29 CFR 1926.452(w)(2): Scaffold casters and wheels were not locked with positive wheel and/or wheel and swivel locks, or equivalent means, to prevent movement of the scaffold while the scaffold was used in a stationary manner: a) West Weaver Covered Bridge / Conococheague Creek area; Employees were working on steel tubular scaffolding while installing stabilizers and x bracing on the wooden covered bridge without having the wheel casters locked into position, on or about 07/16/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1904
- — Z (S) $2380
1926.451 F03
- Issued
- Dec 8, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity: a) West Weaver Covered Bridge / Conococheague Creek area; Employees were working on steel tubular scaffolding while installing stabilizers and x bracing on the wooden covered bridge without the competent person having performed a structural integrity inspection of the scaffolding before each work shift, on or about 07/16/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Lycoming Supply, INC.
View Lycoming Supply, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 237310)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340779792.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.