AKRON, OH —
OSHA Inspection: LANDMARK PLASTICS CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LANDMARK PLASTICS CORPORATION in 1331 KELLY AVE, AKRON, OH 44306 (NAICS 326199). OSHA activity number 340806736.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LANDMARK PLASTICS CORPORATION
- Site address
- 1331 KELLY AVE
- City
- AKRON
- State
- OH
- ZIP
- 44306
- Mailing
- 1331 KELLY AVE, AKRON, OH 44306
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 168
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 8, 2015
- Abate by
- Jan 5, 2016
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about 7/19/15, the employee did not utilize lockout procedures when operators were required to remove jams from the out-feed packer of the trim press.
Recent events (2)
- — I (S) $6930
- — Z (S) $6930
1910.147 C04 II B
- Issued
- Dec 8, 2015
- Penalty
- Initial $6,930 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: On or about 07/27/2015, the company's lockout/tagout procedure for servicing the trim press machinery did not include specific procedural steps or additional methods and instructions for the control of potentially hazardous stored energy (gravity) when clearing a jam.
Recent events (2)
- — I (O) $0
- — Z (S) $6930
1910.147 D05 I
- Issued
- Dec 8, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices: On or about 07/19/2015, the employer failed to ensure that the residual energy (gravity) was effectively isolated, blocked, restrained or otherwise rendered safe prior to employees clearing jammed material(s) from inside of the die(s) of the trim press.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Dec 8, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: On or about 7/19/15, employees who are required to remove jams from the trim press had not received training on how to remove jams. Employees were exposed to pneumatic, electrical, gravity, etc., energy sources.
Recent events (2)
- — I (S) $6930
- — Z (S) $6930
1910.147 C06 I
- Issued
- Dec 8, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $13,860 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: As of 07/27/2015 annual inspections or audits of the company's lockout procedures were not completed, as required. Energy sources used at the facility include; but are not limited to, electric, hydraulic, pneumatic and gravity. Landmark Plastic Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, 29 CFR1910.147(c)(6)(i), which was contained in OSHA Inspection Number 595842, Citation Number 01, Item Number 04, and was affirmed as a Final Order on 03/05/2013, with respect to the work place located at 1331 Kelly Ave., Akron, OH 44306.
Recent events (2)
- — I (S) $6000
- — Z (R) $13860
More inspections at Landmark Plastics Corporation
View Landmark Plastics Corporation's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340806736.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.