OSHA Inspection: CONTOUR SCREW PRODUCTS, INC.

Issued

Aug 7, 2015

Abate by

Sep 2, 2015

Penalty

Initial $2,100 · Current $2,100

Hazardous substances 20375010

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  (a) On August 4, 2015, Contour Screw Products, Inc. did not ensure that employees who voluntarily wore 3M 6200 tight-fitting, half-mask respirators with organic vapor cartridges were medically evaluated prior to using the respirator in the workplace.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Aug 7, 2015

Abate by

Sep 2, 2015

Penalty

Initial $0 · Current $0

Hazardous substances 20375010

General-duty citation text

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  (a) On August 4, 2015, Contour Screw Products, Inc. did not provide the information on Appendix D to employees who voluntarily wear respirators in the workplace.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Aug 7, 2015

Abate by

Sep 2, 2015

Penalty

Initial $0 · Current $0

Hazardous substances 20375010

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) Contour Screw Products, Inc. did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:  1) Requirement for labeling of containers of hazardous chemicals; 2) Material safety data sheet availability; 3) Training of employees; 4) A complete list of hazardous chemicals known to be in the workplace; 5) Methods to inform employees of the hazards on non-routine tasks; and 6) Methods to inform other employer(s) of material safety data sheet availability; the labeling system; and any precautionary measures to protect employees.  Employees were exposed to hazardous chemicals, including, but not limited to: petroleum distillates and mineral oil mist.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Aug 7, 2015

Abate by

Sep 2, 2015

Penalty

Initial $0 · Current $0

Hazardous substances 20375010

General-duty citation text

29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:   (a) Contour Screw Products, Inc. did not train its employees with regard to the updated hazard communication requirements for the new label elements and the Safety Date Sheets (SDS) format by December 1, 2013.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).