PLEASANTON, TX —
OSHA Inspection: W W WOOD, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of W W WOOD, INC. in 1799 CORGEY ROAD, PLEASANTON, TX 78064 (NAICS 321999). OSHA activity number 340842426.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- W W WOOD, INC.
- Site address
- 1799 CORGEY ROAD
- City
- PLEASANTON
- State
- TX
- ZIP
- 78064
- Mailing
- P.O.BOX. 398, PLEASANTON, TX 78064
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 115
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Sep 30, 2015
- Abate by
- Dec 21, 2015
- Penalty
- Initial $6,300 · Current $5,040 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a-h) Saw line section, pop-up saws 1-8: On or about August 11, 2015, and at times prior thereto, employees were exposed to hazards associated with unexpected startup while removing saw dust or replacing the cutting blade on the pop-up saws. (i) Saw line section, chunker machine: On or about August 11, 2015, and at times prior thereto, employees were exposed to the hazards associated with unexpected startup while cleaning out the jams on the chunker machine.
Recent events (2)
- — I (O) $5040
- — Z (S) $6300
1910.212 A01
- Issued
- Sep 30, 2015
- Abate by
- Oct 20, 2015
- Penalty
- Initial $6,300 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Saw line section, pop-up saw #5: On or about August 11, 2015, and at times prior thereto, employees were exposed to a caught by hazard, while using an Ironwood pop-up saw to cut tree logs that did not have a functioning interlock switch to prevent the rotating saw blade door from opening while in operation.
Recent events (2)
- — I (S) $0
- — Z (S) $6300
1910.305 B01 I
- Issued
- Sep 30, 2015
- Abate by
- Oct 20, 2015
- Penalty
- Initial $6,300 · Current $5,040 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: Saw line section, conveyor #4: On or about August 11, 2015, and at times prior thereto, employees were exposed to an electrical hazard, while using a conveyor belt motor that had exposed 480 volt electrical conductors entering an electrical box attached to the motor.
Recent events (2)
- — I (O) $5040
- — Z (S) $6300
1910.305 G02 III
- Issued
- Sep 30, 2015
- Abate by
- Oct 20, 2015
- Penalty
- Initial $6,300 · Current $5,040 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: Saw line section, conveyor #2: On or about August 11, 2015, and at times prior thereto, employees were exposed to an electrical hazard, while using a conveyor belt motor that did not have strain relief on the 480 volt power feed cord.
Recent events (2)
- — I (O) $5040
- — Z (S) $6300
More inspections at W W Wood, INC.
View W W Wood, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340842426.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.