GALESBURG, IL —
OSHA Inspection: ILPEA INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ILPEA INDUSTRIES, INC. in 611 S LINWOOD ROAD, GALESBURG, IL 61401 (NAICS 326220). OSHA activity number 340861798.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ILPEA INDUSTRIES, INC.
- Site address
- 611 S LINWOOD ROAD
- City
- GALESBURG
- State
- IL
- ZIP
- 61401
- Mailing
- 611 S LINWOOD ROAD, GALESBURG, IL 61401
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326220
- Employees
- 120
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.22 A01
- Issued
- Dec 3, 2015
- Abate by
- Dec 30, 2015
- Penalty
- Initial $3,960 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: Employees were exposed to tripping hazards because there was merchandise stacked and stored all around the facility.
Recent events (2)
- — I (S) $2772
- — Z (S) $3960
1910.22 B01
- Issued
- Dec 3, 2015
- Abate by
- Dec 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard: Employees were exposed to tripping hazards because there was merchandise stacked and stored in the aisles.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.36 G02
- Issued
- Dec 3, 2015
- Abate by
- Dec 9, 2015
- Penalty
- Initial $3,960 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points: Employees working near the east wall of Extrusion Line 2 were exposed to fire and smoke inhalation because the exit access was 20 inches wide.
Recent events (2)
- — I (S) $2772
- — Z (S) $3960
1910.176 B
- Issued
- Dec 3, 2015
- Abate by
- Dec 9, 2015
- Penalty
- Initial $3,960 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse: An employee working near the east wall of Extrusion Line 2 was exposed to struck by hazards because boxes of material were not stored in a stable manner.
Recent events (2)
- — I (S) $2772
- — Z (S) $3960
1910.242 B
- Issued
- Dec 3, 2015
- Abate by
- Dec 30, 2015
- Penalty
- Initial $3,960 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: An employee working on Extrusion Line 6 was exposed to embolism hazards because the compressed air used for cleaning purposes exceeded 30 p.s.i.
Recent events (2)
- — I (S) $2772
- — Z (S) $3960
1910.303 F01
- Issued
- Dec 3, 2015
- Abate by
- Dec 15, 2015
- Penalty
- Initial $2,970 · Current $2,079 Reduced
General-duty citation text
29 CFR 1910.303(f)(1): Each disconnecting means required by Subpart S of Part 1910 for motors and appliances was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: An employee working: a. near the east wall of Extrusion Line 2 was exposed to injury because the disconnect switch was not marked to indicate its purpose. b. near the Carton/Box Maker was exposed to injury because the disconnect switch located behind the Delta Table Saw was not marked to indicate its purpose.
Recent events (2)
- — I (S) $2079
- — Z (S) $2970
1910.303 G01
- Issued
- Dec 3, 2015
- Abate by
- Dec 15, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: An employee working near the east wall of Extrusion Line 2 was exposed to injury because the electrical panels were blocked.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 J04 V
- Issued
- Dec 3, 2015
- Abate by
- Dec 15, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(4)(v): Disconnecting means were not readily accessible: An employee: a. working near the east wall of Extrusion Line 2 was exposed to injury because the disconnect switches were not readily accessible. b. working near the Carton/Box Maker was exposed to injury because the disconnect switches were not readily accessible.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Ilpea Industries, INC.
View Ilpea Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326220)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340861798.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.