Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TIMBER-END, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of TIMBER-END, INC. in 154 QUARRY RD, COAL TOWNSHIP, PA 17866 (NAICS 562111). OSHA activity number 340888411.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Timber-End, INC. — free Get an email when a new federal OSHA severe-injury report for Timber-End, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
TIMBER-END, INC.
Site address
154 QUARRY RD
City
COAL TOWNSHIP
State
PA
ZIP
17866
Mailing
154 QUARRY RD, COAL TOWNSHIP, PA 17866
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
562111
Employees
7
Ownership type
A

8 citations on file for this inspection.

1910.146 D03

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 7, 2015
Abate by
Jan 26, 2016
Penalty
Initial $2,000 · Current $1,250 Reduced
29 CFR 1910.146(d)(3): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not develop and implement the means, procedures, and practices necessary for safe permit space entry operations:    a) Truck Packer Bodies: Specific procedures were not developed and implemented to protect employees who enter a confined space containing a mechanical hazard, on or about September 1, 2015.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1250
  • — Z (S) $2000

1910.178 L01 I

Other-than-serious 1 instance 3 exposed
Issued
Dec 7, 2015
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    a) Truck Maintenance Shop: Employees who operate a Cat V50C forklift have not received training on the safe operation of powered industrial trucks, on or about September 1, 2015.    ABATEMENT OBSERVED DURING INSPECTION  NO CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (S) $2000

1910.215 A04

Serious Gravity 1 1 instance 2 exposed
Issued
Dec 7, 2015
Abate by
Dec 17, 2015
Penalty
Initial $1,200 · Current $1,000 Reduced
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:    a) Dumpster Manufacturing Area: The Baldor bench grinder was not used with a work rest to support off-hand grinding exposing workers to the hazard of being struck by flying material, on or about September 1, 2015.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1200

1910.215 B09

Serious Gravity 1 1 instance 2 exposed
Issued
Dec 7, 2015
Abate by
Dec 17, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) Dumpster Manufacturing Area: The distance between the abrasive wheel and the adjustable tongue on the Baldor bench grinder was greater than 1/4 of an inch exposing the operator to being struck by flying debris, on or about September 1, 2015.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.243 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Dec 7, 2015
Abate by
Dec 17, 2015
Penalty
Initial $1,200 · Current $1,000 Reduced
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4):    a) Dumpster Manufacturing Area: An abrasive wheel was used on a portable grinder without the guard installed exposing the operator to an abrasion injury, on or about September 1, 2015.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1200

1910.253 B02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 7, 2015
Penalty
Initial $2,000 · Current $1,250 Reduced
29 CFR 1910.253(b)(2)(ii): Inside of buildings, cylinders were not stored in a well-protected, well-ventilated, dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil or excelsior:    a) Dumpster Manufacturing Area: A compressed oxygen cylinder was stored unsecured near highly combustible waste oil exposing workers to a fire hazard, on or about September 1, 2015.    ABATEMENT OBSERVED DURING INSPECTION  NO CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1250
  • — Z (S) $2000

1910.253 B04 III

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 7, 2015
Abate by
Dec 17, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:  a) Dumpster Manufacturing Area: Compressed oxygen cylinders stored with reserve stocks of acetylene and near a large heating oil tank where not provided with an adequate fire-resistant barrier exposing workers to a fire hazard, on or about September 1, 2015.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B05 III B

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 7, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(5)(iii)(B): Cylinders were not handled carefully which could result in damage to the cylinder, valve or safety devices and cause leakage:  a) Truck Maintenance Facility: An unsecured compressed oxygen cylinder was rolled by an employee from the middle of the facility to the designated cylinder storage area exposing the cylinder to damage and employees to a fire and explosion hazard, on or about September 1, 2015.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Timber-End, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340888411.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.