Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GRANDVIEW BUILDINGS & SUPPLY, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GRANDVIEW BUILDINGS & SUPPLY, INC. in 512 N WEBSTER, TAYLORVILLE, IL 62568 (NAICS 452990). OSHA activity number 340900661.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Grandview Buildings & Supply, INC. — free Get an email when a new federal OSHA severe-injury report for Grandview Buildings & Supply, INC. is published. One employer, no account, unsubscribe in one click.
Site address
512 N WEBSTER
City
TAYLORVILLE
State
IL
ZIP
62568
Mailing
512 N WEBSTER, TAYLORVILLE, IL 62568
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
452990
Employees
10
Ownership type
A

14 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 2 instances 6 exposed
Issued
Dec 2, 2015
Abate by
Jan 21, 2016
Penalty
Initial $4,200 · Current $4,200
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:   Employees were exposed to tripping hazards:   a.  while working in the Work Room, Store Room and Dock/Stock Room of the Grandview Outlet because there is merchandise stored and stacked all over.   b.  while working in the Stock Room of the Home Center because there is merchandise stored and stacked all over.
Recent events (1)
  • — Z (S) $4200

1910.22 A02

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition:  Employees working in the Store Room of the Grandview Outlet were exposed to slips and falls on liquid soap because the walking and working surfaces were not maintained in a clean and dry condition.
Recent events (1)
  • — Z (S) $0

1910.23 A08 II

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 14, 2015
Penalty
Initial $2,100 · Current $2,100
29 CFR 1910.23(a)(8)(ii): Every floor hole into which persons could accidentally walk were not guarded by a floor hole cover of standard strength and construction:  Employees working in the Storeroom of the Grandview Outlet were exposed to trip hazards because the electrical box located in the floor of a walkway was not provided with a cover.
Recent events (1)
  • — Z (S) $2100

1910.23 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 2, 2015
Abate by
Jan 21, 2016
Penalty
Initial $2,800 · Current $2,800
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:   An employee working at the Grandview Outlet was exposed to fall hazards because:   a.  the mezzanine located on the north wall of the Store Room  was not guarded by a standard railing or its equivalent.  The open sided floor was approximately 9'-0" feet from the open sided floor to the concrete surface below.   b.  the dock ramp located off the back Dock/Stock Room was not guarded by a standard railing or its equivalent.  The open sided floor was approximately 4'-3" feet from the open sided floor to the concrete surface below.
Recent events (2)
  • — Z $28000
  • — Z (S) $2800

1910.36 D01

Serious Gravity 5 1 instance 6 exposed
Issued
Dec 2, 2015
Abate by
Jan 21, 2016
Penalty
Initial $2,800 · Current $2,800
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:   Employees were exposed to the hazards of smoke inhalation and burns because:   a.  while working in the Grandview Outlet because the emergency exit located on the north wall of the Work Room contained a locking device that restricted emergency use, such as a bungee cord.   b.  while working in the Grandview Outlet because the emergency exit located in the northeast wall of the Store Room contained a locking device that restricted emergency use, such as a slide blot.   c.  while working in the Grandview Outlet because the emergency exit located on the north wall of the Dock/Stock Room contained a locking device that restricted emergency use, such as a deadbolt.   d.  while working in the Home Center because the emergency exit located on the east wall of the Stock Room contained a locking device that restricted emergency use, such as a metal bar.
Recent events (1)
  • — Z (S) $2800

1910.36 D02

Serious Gravity 5 4 instances 6 exposed
Issued
Dec 2, 2015
Abate by
Jan 21, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.36(d)(2): Exit route doors were not free of a device or alarm that could restrict emergency use of the exit route if the device or alarm fails:   Employees were exposed to the hazards of smoke inhalation and burns:   a.  while working in the Grandview Outlet because the emergency exit located on the north wall of the Work Room contained a locking device that restricted emergency use, such as a bungee cord.   b.  while working in the Grandview Outlet because the emergency exit located on the northeast wall of the Store Room contained a locking device that restricted emergency use, such as a slide bolt.   c.  while working in the Grandview Outlet because the emergency exit located on the north wall of the Dock/Stock Room contained a locking device that restricted emergency use, such as a deadbolt.   d.  while working in the Home Center because the emergency exit located on the east wall of the Stock Room contained a locking device that restricted emergency use, such as a metal bar.
Recent events (1)
  • — Z (S) $0

1910.36 D03

Serious Gravity 5 4 instances 6 exposed
Issued
Dec 2, 2015
Abate by
Jan 21, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.36(d)(3):  Exit route doors were locked from the inside:   Employees were exposed to the hazards of smoke inhalation and burns:   a.  while working in the Grandview Outlet because the emergency exit located on the north wall of the Work Room contained a locking device that restricted emergency use, such as a bungee cord.   b.  while working in the Grandview Outlet because the emergency exit located on the northeast wall of the Store Room contained a locking device that restricted emergency use, such as a slide bolt.   c.  while working in the Grandview Outlet because the emergency exit located on the north wall of the Dock/Stock Room contained a locking device that restricted emergency use, such as a deadbolt.   d.  while working in the Home Center because the emergency exit located on the east wall of the Stock Room contained a locking device that restricted emergency use, such as a metal bar.
Recent events (1)
  • — Z (S) $0

1910.36 G02

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 8, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1910.36(g)(2):  Exit access(es) were not at least 28 inches (71.1 cm) wide at all points:    Employees working:    a.  in the Work Room of the Grandview Outlet were exposed to fire and smoke inhalation because the exit access located on the north wall was 13 inches wide.    b.  in the Stock Room of the Grandview Outlet were exposed to fire and smoke inhalation because the exit access located on the north wall was 25 inches wide.
Recent events (1)
  • — Z (S) $2800

1910.36 G04

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.36(g)(4): Objects that projected into the exit route reduced the width of the exit route to less than the 28 inches minimum width requirements for exit routes:  Employees working:  a.  in the Work Room of the Grandview Outlet were exposed to fire and inhalation because the exit access was 13 inches wide.  b.  in the Stock Room of the Grandview Outlet were exposed to fire and smoke inhalation because the exit access was 25 inches wide.
Recent events (1)
  • — Z (S) $0

1910.37 B02

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 8, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":  Employees working in the Work Room of the Grandview Outlet were exposed to the hazards of smoke inhalation and burns because the door located on the north wall was not marked with an Exit sign.
Recent events (1)
  • — Z (S) $2800

1910.141 A04 I

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 29, 2015
Penalty
Initial $4,200 · Current $4,200
29 CFR 1910.141(a)(4)(i): Receptacle(s) used for putrescible solid or liquid waste or refuse were not equipped with tight fitting cover(s) necessary to maintain sanitary conditions:   Cardboard boxes and other containers located in the Back Room of the Grandview Outlet were used for garbage collection and not fitted with suitable covers.
Recent events (1)
  • — Z (S) $4200

1910.303 F01

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 14, 2015
Penalty
Initial $2,100 · Current $2,100
29 CFR 1910.303(f)(1): Each disconnecting means required by Subpart S of Part 1910 for motors and appliances was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  Employees working in the Stock Room of the Home Center were exposed to injury because the disconnect switches were not marked to indicate its purpose.
Recent events (1)
  • — Z (S) $2100

1910.303 G01

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 2, 2015
Abate by
Dec 14, 2015
Penalty
Initial $2,100 · Current $2,100
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  Employees working in the Stock Room of the Home Center were exposed to injury because the electrical panels were blocked.
Recent events (1)
  • — Z (S) $2100

1910.305 B02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 2, 2015
Abate by
Dec 8, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:  An employee working in the Work Room of the Grandview Outlet was exposed to electrical shock hazards because the electrical outlet located on the east wall was not equipped with a suitable cover.
Recent events (1)
  • — Z (S) $2800

View Grandview Buildings & Supply, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340900661.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.