Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AMERICAN ROOFING AND SHEET METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AMERICAN ROOFING AND SHEET METAL, INC. in 15701 GULF BLVD, REDINGTON BEACH, FL 33708 (NAICS 238160). OSHA activity number 340911221.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch American Roofing and Sheet Metal, INC. — free Get an email when a new federal OSHA severe-injury report for American Roofing and Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
15701 GULF BLVD
City
REDINGTON BEACH
State
FL
ZIP
33708
Mailing
5425 W CRENSHAW ST., TAMPA, FL 33634
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 12, 2015
Penalty
Initial $1,496 · Current $898 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a. On the 3/12 pitched roof, eye protection was not provided to employees operating pneumatic nail guns, exposing employees to a struck by hazard, on or about 9/11/15.
Recent events (2)
  • — I (S) $897.6
  • — Z (S) $1496

1926.1053 B08

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 12, 2015
Penalty
Initial $1,496 · Current $898 Reduced
29 CFR 1926.1053(b)(8): Ladders placed in a location where they could be displaced by workplace activities or traffic, such as in passageways, doorways, or driveways, were not secured to prevent accidental displacement, nor was a barricade used to keep the activities or traffic away from the ladder:  a. In the drive way, the portable extension ladder used to used to climb on the roof was not secured from displacement, exposing employees to a 10 foot fall hazard, on or about 9/11/15.
Recent events (2)
  • — I (S) $897.6
  • — Z (S) $1496

1926.1053 B12

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 12, 2015
Penalty
Initial $1,870 · Current $1,122 Reduced
29 CFR 1926.1053(b)(12): Ladders used where the employee or the ladder could contact exposed energized electrical equipment did not have nonconductive siderails:  a. In the driveway, the metal framed portable extension ladder used to climb on the roof was positioned approximately 2 feet from overhead power lines, exposing employees to an electrical shock hazard, on or about 9/11/15.
Recent events (2)
  • — I (S) $1122
  • — Z (S) $1870

1926.501 B13

Repeat Gravity 5 1 instance 4 exposed
Issued
Nov 12, 2015
Penalty
Initial $5,280 · Current $3,168 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a. On the 3/12 pitched roof, fall protection was not provided, exposing employees to a 10 foot fall hazard, on or about 9/11/15.   American Roofing & Sheet Metal, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(1) which was contained in OSHA inspection number 772045, citation number 1, item number 1b and was affirmed as a final order on 19 Feb 2013, with respect to a workplace located at 455 8th ST S. Saint Petersburg, FL 33707.  American Roofing & Sheet Metal, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(10), which was contained in OSHA inspection number 316073857, citation number 1, item number 1 and was affirmed as a final order on 9 Nov 2011, with respect to a workplace located at 2450 Drew St, Clearwater, FL 33765.
Recent events (2)
  • — I (R) $3168
  • — Z (R) $5280

View American Roofing and Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340911221.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.