EAST PATCHOGUE, NY —
OSHA Inspection: SOUTH OCEAN CUSTOM FRAMING CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SOUTH OCEAN CUSTOM FRAMING CORP. in 1661 WILLIAM FLOYD PKWY, EAST PATCHOGUE, NY 11772 (NAICS 236116). OSHA activity number 340928274.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTH OCEAN CUSTOM FRAMING CORP.
- Site address
- 1661 WILLIAM FLOYD PKWY
- City
- EAST PATCHOGUE
- State
- NY
- ZIP
- 11772
- Mailing
- 1155 MONTAUK HWY, EAST PATCHOGUE, NY 11772
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236116
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.501 B13
- Issued
- Oct 22, 2015
- Abate by
- Oct 28, 2015
- Penalty
- Initial $2,800 · Current $1,700 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Worksite: Employees who were framing the residential construction from the tops of the second and third stories without fall protection were exposed to falls of up to and including approximately 30 ft. to the ground below; on or about 9/16/2015. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1700
- — Z (S) $2800
1926.503 A01
- Issued
- Oct 22, 2015
- Abate by
- Nov 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) Worksite: Employees who were framing the residential construction from the tops of the second and third stories without fall protection were exposed to falls of up to and including approximately 30 ft. to the ground below and had not been trained to recognize and address fall hazards; on or about 9/16/2015. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B13
- Issued
- Oct 22, 2015
- Abate by
- Oct 28, 2015
- Penalty
- Initial $2,000 · Current $1,300 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: a) Worksite: An employee was using the top and top step of a 7 ft. stepladder to access the top of the third story to do framing work; on or about 9/16/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1300
- — Z (S) $2000
1926.1060 A
- Issued
- Oct 22, 2015
- Abate by
- Nov 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards: a) Worksite: An employee was using the top and top step of a 7 ft. stepladder to access the top of the third story to do framing work and had not been trained in ladder use and safety; on or about 9/16/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at South Ocean Custom Framing Corp.
View South Ocean Custom Framing Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 236116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340928274.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.