OSHA Inspection: SOUTH JERSEY CENTRAL MANUFACTURING LOCATION

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $4,950 · Current $2,970 Reduced

General-duty citation text

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:    a) Production area next to fryer lines two and three: The employer did not ensure that goggles and face shields were provided and required for use where employees used DCT Heavy Duty Degreaser, a corrosive chemical, to clean the fryers, on or about 10/5/15.    b) Back washroom: The employer did not ensure that goggles and face shields were provided and required for use where employees poured DCT Heavy Duty Degreaser, a corrosive chemical, into buckets and trash cans to clean the floors, on or about 10/5/15.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $4,950 · Current $2,970 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a) Throughout facility: The employer did not ensure that employees utilized the lockout tagout procedures when cleaning, servicing or maintaining equipment, including, but not limited to, the doughnut cutters, Belshaw Thermomatic proofer boxes model TM600#23932 serial 1404045 and model TM600 # 22584 serial 14030178, Belshaw Century Gas fryers model C10-24GLH#23929 serial 14030180, Hobart Mixers and Berto Yeast Mixers model 160-AR machine number 171330 and model 160-AR machine number 171329, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $4,950 · Current $2,970 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy:    a) Throughout facility: The employer did not develop specific energy control procedures that outlined the scope, purpose, authorization, rules and techniques to be utilized for the control of hazardous energy for the equipment that employees cleaned, serviced or maintained, including, but not limited to, the doughnut cutters, Belshaw Thermomatic proofer boxes model TM600#23932 serial 1404045 and model TM600 # 22584 serial 14030178, Belshaw Century Gas fryers model C10-24GLH#23929 serial 14030180, Hobart Mixers and Berto Yeast Mixers model 160-AR machine number 171330 and model 160-AR machine number 171329, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $4,950 · Current $2,970 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources:      a) Throughout facility: The employer did not provide and ensure the use of devices that would isolate, secure or block the energy sources on machines to employees that cleaned, serviced or maintained equipment, including, but not limited to, the doughnut cutters, Belshaw Thermomatic proofer boxes model TM600#23932 serial 1404045 and model TM600 # 22584 serial 14030178, Belshaw Century Gas fryers model C10-24GLH#23929 serial 14030180, Hobart Mixers and Berto Yeast Mixers model 160-AR machine number 171330 and model 160-AR machine number 171329, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $4,950 · Current $2,970 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:    a) Throughout facility: The employer did not provide training to authorized maintenance and sanitation employees for equipment that cleaned, serviced or maintained equipment, including, but not limited to, the doughnut cutters, Belshaw Thermomatic proofer boxes model TM600#23932 serial 1404045 and model TM600 # 22584 serial 14030178, Belshaw Century Gas fryers model C10-24GLH#23929 serial 14030180, Hobart Mixers and Berto Yeast Mixers model 160-AR machine number 171330 and model 160-AR machine number 171329, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $4,950 · Current $2,970 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a) Production area next to fryer lines two and three: An eyewash station capable of 15 minutes of continuous flushing was not available where employees used DCT Heavy Duty Degreaser, a corrosive chemical, to clean the fryers, on or about 10/5/15.    b) Back washroom: An eyewash station capable of 15 minutes of continuous flushing was not available where employees poured DCT Heavy Duty Degreaser, a corrosive chemical, into buckets and trash cans to clean the floors, on or about 10/5/15.     NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $3,960 · Current $2,376 Reduced

General-duty citation text

29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:      a) Production area: A Yale AC Power forklift was not taken out of service when the ignition key did not operate and a screw driver was used to start the lift using the e-stop and the right side drive tire was damaged causing the truck to wobble, on or about 9/30/15.       NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $5,940 · Current $3,564 Reduced

General-duty citation text

29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition:    a) Throughout facility: Floors were not maintained in a clean and dry condition sufficiently enough to reduce or eliminate slipping hazards due to the use of water for cleaning the floors and spilled product on the floor from production processes, such as, but not limited to, oil, flour and dough, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.       South Jersey Central Manufacturing Location dba SJ CML was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1910.22(a)(2) which was contained in OSHA Inspection Number 1007939, Citation Number 1, Item Number 1 and was affirmed as a final order on 5/18/15, with respect to a workplace located at 130 Benigdo Blvd, Bellmawr, NJ 08031.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $200 · Current $120 Reduced

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    a) Production area: The employer did not document an evaluation for a newly hired employee operating the Yale AC Power forklift, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.     South Jersey Central Manufacturing Location dba SJ CML was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1910.178(l)(6) which was contained in OSHA Inspection Number 1007939, Citation Number 2, Item Number 2 and was affirmed as a final order on 5/18/15 with respect to a workplace located at 130 Benigdo Blvd, Bellmawr, NJ 08031.

Issued

Mar 24, 2016

Penalty

Initial $7,920 · Current $4,752 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) Production area lines one and two: A conveyor belt that fed doughnuts to the proofer had an opening between the flights exposing employees to rotating parts, on or about 10/5/15.        South Jersey Central Manufacturing Location dba SJ CML was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1910.212 (a)(1) which was contained in OSHA Inspection Number 1007939, Citation Number 1, Item Number 8 and was affirmed as a final order on 5/18/15 with respect to a workplace located at 130 Benigdo Blvd, Bellmawr, NJ 08031.

Issued

Mar 24, 2016

Abate by

Apr 19, 2016

Penalty

Initial $9,900 · Current $5,940 Reduced

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) Throughout facility: The employer did not provide effective information and training to employees for the hazardous chemicals used on site, including, but not limited to, DCT Heavy Duty Degreaser, a corrosive chemical, Quick Clean Broad Range Quaternary Sanitizer and Spic and Span, on or about 10/5/15.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.       South Jersey Central Manufacturing Location dba SJ CML was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1910.1200(h)(1) which was contained in OSHA Inspection Number 1007939, Citation Number 2, Item Number 4 and was affirmed as a final order on 5/18/15 with respect to a workplace located at 130 Benigdo Blvd, Bellmawr, NJ 08031.