Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NEWPORT METALS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NEWPORT METALS, INC. in 582 ELM STREET, NEWPORT, ME 04953 (NAICS 423930). OSHA activity number 340964634.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Newport Metals, INC. — free Get an email when a new federal OSHA severe-injury report for Newport Metals, INC. is published. One employer, no account, unsubscribe in one click.
Site address
582 ELM STREET
City
NEWPORT
State
ME
ZIP
04953
Mailing
P. O. BOX 79, EAST NEWPORT, ME 04933
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
6
Ownership type
A

7 citations on file for this inspection.

1910.110 E04 III

Serious Gravity 10 1 instance 1 exposed
Issued
Nov 30, 2015
Penalty
Initial $3,080 · Current $3,080
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating:  Garage - The liquid petroleum cylinder mounted on the back of the Hyster 55 was not secured.
Recent events (1)
  • — Z (S) $3080

1910.212 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Nov 30, 2015
Penalty
Initial $3,080 · Current $3,080
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  At the Site - The Precision Baler did not have a functional interlock that prevented the ram from operating while the door was open.
Recent events (1)
  • — Z (S) $3080

1910.253 E01

Serious Gravity 10 5 instances 2 exposed
Issued
Nov 30, 2015
Penalty
Initial $3,080 · Current $3,080
29 CFR 1910.253(e)(1): Equipment was not installed and used only in the service for which it was approved and as recommended by the manufacturer:  Equipment was not installed and used only in the service for which it was approved and as recommended by the manufacturer, in the following instances:  a)  At the Site - The connected individual oxygen and acetylene hoses lines were secured with small adjustable radiator hose clamps. b)  At the Site - An oxygen hose line had a blister on the outer layer. c)  At the Site - The preheat valve knob could no longer prevent the fuel gases from escaping from the hoses in the "OFF" position.
Recent events (1)
  • — Z (S) $3080

1910.134 E01

Other-than-serious 2 instances 2 exposed
Issued
Nov 30, 2015
Abate by
Dec 17, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  At the Site - Employees were not medically evaluated prior to using half-face respirators.
Recent events (1)
  • — Z (O) $0

1910.134 K

Other-than-serious 2 instances 2 exposed
Issued
Nov 30, 2015
Abate by
Dec 17, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k): 29 CFR 1910.134(k):   The employer did not provide the basic information on respirators in accordance to Appendix D of this section to employees who wear respirators when not required by this section or by the employer to do so:  At the Site - The employees who voluntarily wore the half-face respirators were not trained to follow Appendix D.
Recent events (1)
  • — Z (O) $0

1910.178 L04 III

Other-than-serious 1 instance 1 exposed
Issued
Nov 30, 2015
Abate by
Dec 10, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  At the Site - A fork truck operator's evaluation was overdue.
Recent events (1)
  • — Z (O) $0

1910.178 P01

Other-than-serious 2 instances 1 exposed
Issued
Nov 30, 2015
Abate by
Dec 4, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):  Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s), in the following instances:  a) Garage - The hydraulic hose to the Hyster 55 forklift that elevated the mast to higher levels was not functional and found lying on the console.  b) Garage - The cover to protect the battery from damage was missing.
Recent events (1)
  • — Z (O) $0

View Newport Metals, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340964634.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.