FRISCO, TX —
OSHA Inspection: ALLIED INSULATION & SUPPLY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ALLIED INSULATION & SUPPLY, INC. in 2820 AVENUE OF THE STARS ORIGIN AT FRISCO BRIDGES, FRISCO, TX 75034 (NAICS 238310). OSHA activity number 340969195.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALLIED INSULATION & SUPPLY, INC.
- Site address
- 2820 AVENUE OF THE STARS ORIGIN AT FRISCO BRIDGES
- City
- FRISCO
- State
- TX
- ZIP
- 75034
- Mailing
- 2737 MARKET STREET, GARLAND, TX 75041
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238310
- Employees
- 40
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Dec 9, 2015
- Abate by
- Jan 22, 2016
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment such as removing foreign debris from the hopper or replacing broken pulley axle keys on an insulation blowing machine that employees were not protected from caught-in and nip point hazards.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1926.300 B03
- Issued
- Dec 9, 2015
- Abate by
- Dec 21, 2015
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1926.300(b)(3): "Types of guarding." One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are - barrier guards, two-hand tripping devices, electronic safety devices, etc: (a) The employer did not ensure that distance guarding was being maintained by employees operating insulation blower machines exposing employees to point of operation and caught-in hazards.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1926.307 F03
- Issued
- Dec 9, 2015
- Abate by
- Dec 21, 2015
- Penalty
- Initial $4,200 · Current $0 Reduced
General-duty citation text
29 CFR 1926.307(f)(3): "Sprockets and chains." All sprocket wheels and chains shall be enclosed unless they are more than 7 feet (2.128 m) above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets: (a) The employer did not ensure that all sprocket wheels and chains were enclosed while insulation blowing machines were being operated exposing employees to nip-point hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $4200
1904.1 A02
- Issued
- Dec 9, 2015
- Abate by
- Dec 21, 2015
- Penalty
- Initial $700 · Current $0 Reduced
General-duty citation text
29 CFR 1904.1(a)(2): If your company had more than ten (10) employees at any time during the last calendar year, you must keep OSHA injury and illness records unless your establishment is classified as a partially exempt industry under CFR 1904.2: (a) The employer did not ensure that injury and illness records were being logged and the company had at least one reportable injury that occurred on September 30, 2015.
Recent events (2)
- — I (O) $0
- — Z (O) $700
More inspections at Allied Insulation & Supply, INC.
View Allied Insulation & Supply, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238310)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340969195.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.