ARLEY, AL —
OSHA Inspection: ADDISON STEEL TRUSS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ADDISON STEEL TRUSS, INC. in 33884 HIGHWAY 278, ARLEY, AL 35540 (NAICS 321214). OSHA activity number 340971068.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADDISON STEEL TRUSS, INC.
- Site address
- 33884 HIGHWAY 278
- City
- ARLEY
- State
- AL
- ZIP
- 35540
- Mailing
- P.O. BOX 225, ADDISON, AL 35540
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321214
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 18, 2016
- Abate by
- Mar 24, 2016
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to struck by hazards: a) On or about October 7, 2015 - Production area, employees were exposed to struck-by hazards from displacement/falling of steel trusses in that the safety latch on the hook of the 2Ton Hoist was missing. b) On or about October 7, 2015 - Production area, employees were exposed to struck-by hazards from displacement/falling of steel trusses in that a bolt was used to secure the hook to the chain.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
5(a)(1)
- Issued
- Feb 18, 2016
- Abate by
- Mar 4, 2016
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or were likely to cause death or serious physical harm to employees in that employees were exposed to struck-by/crushing hazards: a) On or about October 7, 2015 - Facility, an employee was operating a Nissan Datsun Type D YGF03A40V forklift without utilizing the restraint device.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.178 L01 II
- Issued
- Feb 18, 2016
- Abate by
- Apr 5, 2016
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). a) On or about October 7, 2015 - Production area, employees operating powered industrial trucks such as, but not limited to, Hyster 70 195A and Nissan Datsun YGF03A40V had not received training on safe operations.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.1200 E01
- Issued
- Feb 18, 2016
- Abate by
- Jun 1, 2016
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following: a) On or about October 7, 2015 - The employer did not develop a written hazard communication program for employees working with hazardous chemicals such as, but not limited to, welding rods, carbon steel, oxygen and acetylene.
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
1910.1200 H01
- Issued
- Feb 18, 2016
- Abate by
- Jun 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about October 7, 2015 - Facility, employees were not provided effective information and training regarding the hazards associated with welding operations and the use of oxygen and acetylene.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Addison Steel Truss, INC.
View Addison Steel Truss, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321214)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340971068.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.