Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SCHWAN'S GLOBAL SUPPLY CHAIN INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of SCHWAN'S GLOBAL SUPPLY CHAIN INC. in 3019 SCANLAN AVE, SALINA, KS 67401 (NAICS 311412). OSHA activity number 340973619.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Schwan'S Global Supply Chain INC. — free Get an email when a new federal OSHA severe-injury report for Schwan'S Global Supply Chain INC. is published. One employer, no account, unsubscribe in one click.
Site address
3019 SCANLAN AVE
City
SALINA
State
KS
ZIP
67401
Mailing
3019 SCANLAN AVE, SALINA, KS 67401
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311412
Employees
1300
Ownership type
A

6 citations on file for this inspection.

1910.37 A03

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 9, 2016
Abate by
Mar 3, 2016
Penalty
Initial $7,000 · Current $4,000 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  An employee in the Bakery area that is a line attendant was exposed to hazards associated with evacuation in the event of a fire or an anhydrous ammonia leak. The employee was exposed in that only 46 inches was allowed for egress from the floor to the overhead cooling line conveyor.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $7000

1910.36 G02

Serious Gravity 10 2 instances 10 exposed
Issued
Feb 9, 2016
Abate by
Nov 30, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.    Employees in the facility were exposed to hazards associated with evacuation in the event of a fire or an anhydrous ammonia leak. The employees were exposed in that sufficient egress was not given:    a) At the Front Press New Bakery, the exit access was found to be approximately 18.5 inches wide.    b) At the Crust Table, the exit access was found to be approximately 18 inches and 20 inches wide.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 A06

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 9, 2016
Abate by
Feb 9, 2017
Penalty
Initial $5,500 · Current $3,000 Reduced
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place:    An employee operating a RAYMOND forklift (#626 Model 4450) in the production and warehouse areas, as well as employees in near proximity, were exposed to struck-by hazards. The employees were exposed in that the control levers which move the forks were missing the markings to indicate which direction the operator should move the levers to avoid striking someone or something.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5500

1910.253 B04 I

Serious Gravity 5 1 instance 7 exposed
Issued
Feb 9, 2016
Abate by
Mar 3, 2016
Penalty
Initial $5,500 · Current $3,000 Reduced
29 CFR 1910.253(b)(4)(i): Oxygen cylinders were stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders, or near other substance likely to cause or accelerate fire:  Employees at the Fabrication Shop were exposed to fire and explosion hazards. The employees were exposed in that an oxygen cylinder was stored with acetylene cylinders.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5500

1910.212 A01

Repeat Gravity 10 2 instances 2 exposed
Issued
Feb 9, 2016
Abate by
Feb 9, 2017
Penalty
Initial $38,500 · Current $23,000 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) On or about 09/30/15, an employee engaged in production activities, including the unjamming of pans, at Blast Furnace #5 was exposed to amputation hazards in that the out feed conveyor was not guarded    b) An employee engaged in set-up activates at Blast #4 Freezer out feed conveyor was exposed to amputations in that machine guarding was not provided.    The Schwan's Global Supply Chain Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1) which was contained in OSHA inspection number 941314, citation number 1, item number 18 and was affirmed as a final order on 03/27/14, with respect to a workplace located at One Lemon Lane, Atlanta, GA 30307.
Recent events (2)
  • — I (R) $23000
  • — Z (R) $38500

1910.37 B04

Other-than-serious 1 instance 12 exposed
Issued
Feb 9, 2016
Abate by
Mar 3, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent:  In the Back Press Area, directional exit signs were not immediately apparent to direct employees to the nearest exit in the event of an emergency such as a fire.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Schwan'S Global Supply Chain INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340973619.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.