Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ATLAS MATERIALS RECYCLING CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ATLAS MATERIALS RECYCLING CORPORATION in 2329 WHARTON STREET, PITTSBURGH, PA 15203 (NAICS 562920). OSHA activity number 341033611.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Atlas Materials Recycling Corporation — free Get an email when a new federal OSHA severe-injury report for Atlas Materials Recycling Corporation is published. One employer, no account, unsubscribe in one click.
Site address
2329 WHARTON STREET
City
PITTSBURGH
State
PA
ZIP
15203
Mailing
2329 WHARTON STREET, PITTSBURGH, PA 15203
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
562920
Employees
15
Ownership type
A

9 citations on file for this inspection.

1910.132 A

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 25, 2016
Penalty
Initial $1,200 · Current $1,000 Reduced
29 CFR 1910.132(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, and maintained in a sanitary and reliable condition wherever it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact:      a) 2329 Wharton Street, Pittsburgh, PA: On or about October 15, 2015, during production activities at the Harris Gorilla Bailer, the employer did not ensure that fall protection systems/devices were used where employees were exposed to fall hazards of at least approximately 6 feet while removing cardboard/pallets/debris from the top of the dump end of the conveyor.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1200

1910.147 C06 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jan 25, 2016
Abate by
Feb 19, 2016
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed:   a) 2329 Wharton Street, Pittsburgh, PA: On or about November 3, 2015, during service/maintenance activities at the worksite, the employer did not ensure that an audit/inspection of their energy control procedures/program was conducted to ensure compliance. Deficiencies noted during the inspection included, but were not limited to, failing to shut off energy isolating devices to machines/equipment during set up/wire feed and/or service and maintenance work, not having appropriately documented machine specific energy control procedures in place and not requiring all employees who worked on machines/equipment to place locks on energy isolating devices.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1910.147 D04 I

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Jan 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    Instances including, but not limited to the following:  a) 2329 Wharton Street, Pittsburgh, PA: On or about November 3, 2015, during unjamming activities at the Harris Gorilla baler, the employer did not ensure that all employees applied a lockout device to the energy isolating devices in that one employee worked under another employee's lock.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L04 II A

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 25, 2016
Penalty
Initial $2,000 · Current $1,840 Reduced
29 CFR 1910.178(l)(4)(ii)(A): Refresher training was not done when the operator was observed to operate the vehicle in an unsafe manner:      Instances including but not limited to the following:    a) 2329 Wharton Street, Pittsburgh, PA: On or about November 3, 2015, during production activities the employer did not provide refresher training on forklift safety for items such as not wearing seat belts while driving forklifts, not slowing/beeping horns at aisle ways, blind spots and similar areas and allowing forklifts that needed repairs to be used.
Recent events (2)
  • — I (S) $1840
  • — Z (S) $2000

1910.178 P01

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.178(p)(1): If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck was not taken out of service until it has been restored to safe operating condition:   Instances including, but not limited to the following:  a) 2329 Wharton Street, Pittsburgh, PA: On or about November 3, 2015, during production activities, the employer did not ensure that forklifts that needed repairs were taken out of service until repairs were made such as the the Hyster unit # 4, serial number LI77VO7474J, was allowed to operate with a damaged shield/hood over the battery compartment.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Deleted Serious Gravity 1 3 instances 3 exposed
Issued
Jan 25, 2016
Abate by
Feb 11, 2016
Penalty
Initial $1,200 · Current $0 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:   Instances including, but not limited to the following:  a) 2329 Wharton Street, Pittsburgh, PA: On or about November 3, 2015, during production activities, the employer permitted employees to walk/work on a moving conveyor belt at the Harris Gorilla baler unit, exposing employees to machinery related fall hazards.   b) 2329 Wharton Street, Pittsburgh, PA: On or about October 15, 2015, during production activities, the employer permitted employees to walk/work on the conveyor belt at the Harris Gorilla baler unit, exposing employees to machinery related fall hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1200

1910.147 D03

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 25, 2016
Penalty
Initial $0 · Current $1,000
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):      Instances including but not limited to the following:    a) 2329 Wharton Street, Pittsburgh, PA: On or about November 3, 2015, during removal of wiring from forklift axles, the employer did not ensure that all energy isolating devices were located and operated to isolate power in that the power was left on to the units while this work was performed.    b) 2329 Wharton Street, Pittsburgh, PA: On or about January 7, 2016, during wire jam activities at the Harris Gorilla Baler unit, the employer did not ensure that all energy isolating devices were located and operated to isolate power in that the unit was placed in manual mode during this work.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $0

1910.176 B

Other-than-serious 1 instance 2 exposed
Issued
Jan 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.176(b): Storage of material created a hazard or bags, containers, bundles, etc., stored in tiers were not stacked, blocked, interlocked and limited in height so that they were stable and secure against sliding or collapse:  Instances including, but not limited to the following:  a) 2329 Wharton Street, Pittsburgh, PA: On or about November 20, 2015, during production activities, the employer did not ensure that materials stored near the # 918 baler were stable and would not collapse in that boxes were stacked on one another and were tipping, and in some cases appeared to be crushing lower boxes and collapsing them.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.303 F02

Other-than-serious 1 instance 1 exposed
Issued
Jan 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose:    a) 2329 Wharton Street, Pittsburgh, PA: On or about November 20, 2015, during production activities, the employer did not ensure that the circuit breaker panel located near the ramp at the Harris Baler unit had the circuits labeled to identify their purpose.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Atlas Materials Recycling Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341033611.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.