ASHLAND CITY, TN —
OSHA Inspection: TRINITY MARINE PRODUCTS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TRINITY MARINE PRODUCTS INC. in 1050 TRINITY ROAD, ASHLAND CITY, TN 37015 (NAICS 336611). OSHA activity number 341040350.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRINITY MARINE PRODUCTS INC.
- Site address
- 1050 TRINITY ROAD
- City
- ASHLAND CITY
- State
- TN
- ZIP
- 37015
- Mailing
- 1050 TRINITY ROAD, ASHLAND CITY, TN 37015
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336611
- Employees
- 500
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 B09
- Issued
- Apr 6, 2016
- Abate by
- May 2, 2016
- Penalty
- Initial $5,000 · Current $7,000
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Maintenance Shop - On or about 10/28/15, employees were exposed to struck-by hazards when the tongue guard on the 8" DeWalt Bench grinder (DW758) was not adjusted properly. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $7000
- — C (S) $5000
- — Z (S) $5000
1915.134 B
- Issued
- Apr 6, 2016
- Abate by
- May 2, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1915.134(b): Work rests were not kept a distance not to exceed 1/8 inch from the surface of the wheel. a) Maintenance Shop - On or about 10/28/15, employees were exposed to struck-by hazards when the work rest on the 8" DeWalt Bench grinder (DW758) was not adjusted properly. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Apr 6, 2016
- Abate by
- May 2, 2016
- Penalty
- Initial $4,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Warehouse/Receiving (Materials Office) - On or about 10/28/15, power strips were being series connected and not directly connected to permanently installed receptacles. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $2000
- — C (S) $4000
- — Z (S) $4000
1915.87 F01
- Issued
- Apr 6, 2016
- Abate by
- May 2, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1915.87(f)(1): The employer did not provide an adequate number of basket stretchers, or the equivalent, readily accessible to where work is being performed on a vessel or vessel section. a) Barge Dock Area - On or about 10/28/15, employees were exposed to hypothermia when a stretcher/stokes basket was not available for use in a close proximity while working on the barge. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1915.158 B04
- Issued
- Apr 6, 2016
- Abate by
- May 2, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1915.158(b)(4): 90 feet of line was not attached to each ring life buoy. a) Barge Dock Area - On or about 10/28/15, employees were exposed to hypothermia when the life ring did not have 90 feet of line attached to it while working on the barge. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Trinity Marine Products INC.
View Trinity Marine Products INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336611)
More inspections in TN
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341040350.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.