AUSTIN, TX —
OSHA Inspection: MARCO FINE ARTS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MARCO FINE ARTS in 201 W HOWARD LANE, AUSTIN, TX 78753 (NAICS 323111). OSHA activity number 341061042.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARCO FINE ARTS
- Site address
- 201 W HOWARD LANE
- City
- AUSTIN
- State
- TX
- ZIP
- 78753
- Mailing
- 201 W HOWARD LANE, AUSTIN, TX 78753
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 90
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 17, 2016
- Abate by
- Mar 7, 2016
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about October 14, 2015, the employer did not develop, document, and utilize procedures for the control of hazardous energy on such equipment and machines as, but not limited to: the V235 Double Miter Saw, and the Saber paper cutter, exposing employees to the hazards of being struck by moving parts.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1910.147 C05 I
- Issued
- Feb 17, 2016
- Abate by
- Apr 4, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources. On or about October 14, 2015, and at times prior thereto, the employer did not provide locks or other hardware as required to employees to lock out such machines as, but not limited to: the the OMGA V235 Double miter saw and the Saber paper cutter, exposing maintenance personnel and operators to the hazards of being struck by moving parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Feb 17, 2016
- Abate by
- Apr 4, 2016
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. On or about October 14, 2015, and at times prior thereto, the employer did not ensure that maintenance employees and operators had training in the control of hazardous energy for working on the OMGA V235 Double miter saw and the Saber paper cutter, exposing employees to the hazard of being struck by moving parts of machinery.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1910.147 C07 I B
- Issued
- Feb 17, 2016
- Abate by
- Apr 4, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: On or about October 14, 2015, and at times prior thereto, saw operators and paper cutter operators were not trained in the purpose and use of the energy control program, exposing employees to the hazard of being struck by moving parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Feb 17, 2016
- Abate by
- Apr 4, 2016
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: On or about October 14, 2015, and at times prior thereto, the employer did not ensure that lockout devices were used for hazardous energy on the V235 Double Miter Saw, exposing employees to the hazards of being struck by the saw blade.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1910.147 D05 I
- Issued
- Feb 17, 2016
- Abate by
- Feb 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices: On or about October 14, 2015, and at times prior thereto, the employer did not ensure that residual energy of the V235 Double Miter Saw blade was rendered safe after the operator stopped the machine to unjam wood from the blade, exposing employees to the hazards of being struck by the saw blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Marco Fine Arts
View Marco Fine Arts's full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341061042.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.