FULTON, NY —
OSHA Inspection: PATHFINDER INDUSTRIES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PATHFINDER INDUSTRIES INC. in 117 N. THIRD ST., FULTON, NY 13069 (NAICS 332322). OSHA activity number 341081917.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PATHFINDER INDUSTRIES INC.
- Site address
- 117 N. THIRD ST.
- City
- FULTON
- State
- NY
- ZIP
- 13069
- Mailing
- 117 NORTH THIRD STREET, FULTON, NY 13069
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 20
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jan 6, 2016
- Abate by
- Jan 21, 2016
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation of machinery was not guarded to prevent employee(s) from having any part of their body in the danger zone during operating cycle: a) Manual Stripping Area, on or about 11/24/15: The point of operation on the Manual Strip-it was not guarded adequately, there was 7/8-inch opening. b) Laser Department, on or about 11/24/15: Delta 8-inch Drill Press was not provided with a chuck and tool guard.
Recent events (2)
- — I (S) $1600
- — Z (S) $1600
1910.215 B09
- Issued
- Jan 6, 2016
- Penalty
- Initial $1,020 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Lathe Department, on or about 11/24/15: A Porter Cable Bench Grinder had an opening between the tongue guard and grinding wheel that measured 3/4-inch at the right wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $1020
1910.147 C06 I
- Issued
- Jan 6, 2016
- Abate by
- Jan 31, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) Throughout the facility, on or about 11/24/15: Periodic inspections were not being conducted of the energy control procedures to ensure that the procedures and requirements of the standard were being followed. Employees perform servicing and/or maintenance on various machinery or equipment including but not limited to: Laser Cutter; Miller Spectrum 875; Royson Cleaner; Time Saver Lynx; Trupunch 1000; Matsurra 180; Feller VMP-1100; Nakamura SC250; DMG Mori / Serki Turbo HB; Ingersoll Rand Compressor and Ingersoll Rand Environmental Compressor.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Pathfinder Industries INC.
View Pathfinder Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341081917.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.