FULTON, NY —
OSHA Inspection: PATHFINDER INDUSTRIES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PATHFINDER INDUSTRIES INC. in 117 NORTH THIRD STREET, FULTON, NY 13069 (NAICS 332322). OSHA activity number 347372401.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PATHFINDER INDUSTRIES INC.
- Site address
- 117 NORTH THIRD STREET
- City
- FULTON
- State
- NY
- ZIP
- 13069
- Mailing
- 117 NORTH THIRD STREET, FULTON, NY 13069
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.101 B
- Issued
- Jun 5, 2024
- Penalty
- Initial $3,134 · Current $940 Reduced
General-duty citation text
29 CFR 1910.101(b): Section 3.4.4, Compressed Gas Association Pamphlet P-1-1965, as adopted by 29 CFR 1910.101(b): Compressed gas cylinder(s) not in use were not properly supported to prevent them from being knocked over: a.) Welding Shop, Pathfinder Industries Inc., 117 N 3rd Street, Fulton, NY 13069, on or about 3/26/2024; (5) compressed gas cylinders were not secured to prevent them from being knocked over.
Recent events (3)
- — F (O) $940.2
- — C (S) $3134
- — Z (S) $3134
1910.212 A01
- Issued
- Jun 5, 2024
- Penalty
- Initial $3,687 · Current $2,212 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): The employer did not ensure that one or more methods of machine guarding was provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a.) MSC Serial Number 479201, Pathfinder Industries Inc., 117 N 3rd Street, Fulton, NY 13069, on or about 3/18/2024; Employee used a MSC Drill Press, Serial Number 479201, without a chuck or tool guard to drill countersinks into parts. b.) Bridgeport Series I, Pathfinder Industries Inc., 117 N 3rd Street, Fulton, NY 13069, on or about 3/18/2024; Employee used Bridgeport Series I Drill Press without a chuck or tool guard to tap holes into parts.
Recent events (3)
- — F (S) $2212.2
- — C (S) $3687
- — Z (S) $3687
1910.219 D01
- Issued
- Jun 5, 2024
- Penalty
- Initial $3,687 · Current $2,212 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a.) Pathfinder Industries Inc., 117 N 3rd Street, Fulton, NY 13069, on or about 3/26/2024; Employee exposed to moving parts and entanglement hazards due to the pulley for the motor for the Johnson, J Model, Horizonal Band Saw not being guarded.
Recent events (3)
- — F (S) $2212.2
- — C (S) $3687
- — Z (S) $3687
1910.219 E01 I
- Issued
- Jun 5, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a.) Pathfinder Industries Inc., 117 N 3rd Street, Fulton, NY 13069, on or about 3/26/2024; Employee exposed to moving parts and entanglement hazards due to the belt running around the pulley for the motor for the Johnson, J Model, Horizonal Band Saw not being guarded.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Pathfinder Industries INC.
View Pathfinder Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347372401.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.