FLORENCE, AL —
OSHA Inspection: JOSH RICKMAN
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JOSH RICKMAN in 9000 COUNTY ROAD 47, FLORENCE, AL 35634 (NAICS 337110). OSHA activity number 341088573.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOSH RICKMAN
- Site address
- 9000 COUNTY ROAD 47
- City
- FLORENCE
- State
- AL
- ZIP
- 35634
- Mailing
- 9000 COUNTY ROAD 47, FLORENCE, AL 35634
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 3
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 11/30/2015 - Shop, a Cumming drill press model #DB-16-3113 was being operated with unguarded rotating parts.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.213 C01
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) On or about 11/30/2015 - Shop, a Powermatic table saw was being operated with unguarded rotating blades.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C02
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about 11/30/2015 - Shop, a Powermatic table saw was being operated with unguarded rotating blades.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about 11/30/2015 - Shop, a Powermatic table saw was being operated with unguarded rotating blades.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 H01
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: a) On or about 11/30/2015 - Shop, a 10-inch Kobalt compound miter saw was being operated with an unguarded rotating blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 M01
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(m)(1): Cutting heads of wood shaper(s) were not enclosed with a cage or adjustable guard so designed so as to keep the operator's hand away from the cutting edge: a) On or about 11/30/2015 - Shop, table mounted routers were being operated with unguarded rotating blades.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B07 I
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment: a) On or about 11/30/2015 - Shop, a 240 volt panel had an unused opening. b) On or about 11/30/2015 - Shop, a 110 receptacle had two unused openings.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.303 B02
- Issued
- Jan 13, 2016
- Abate by
- Jan 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) On or about 11/30/2015 - Shop, a relocatable power strip was being used as a permanent outlet for chargers. b) On or about 11/30/2015 - Shop, a relocatable power strip was being used as a permanent outlet for cell phones and a radio.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Josh Rickman
View Josh Rickman's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341088573.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.