Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TILCON NEW YORK INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of TILCON NEW YORK INC. in 980 EAST 149TH STREET, BRONX, NY 10455 (NAICS 327390). OSHA activity number 341090520.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Tilcon NEW York INC. — free Get an email when a new federal OSHA severe-injury report for Tilcon NEW York INC. is published. One employer, no account, unsubscribe in one click.
Site address
980 EAST 149TH STREET
City
BRONX
State
NY
ZIP
10455
Mailing
162 OLD MILL RD., WEST NYACK, NY 10994
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327390
Employees
12
Ownership type
A

4 citations on file for this inspection.

1910.22 A01

Other-than-serious 1 instance 3 exposed
Issued
Apr 13, 2016
Abate by
Feb 17, 2017
Penalty
Initial $7,000 · Current $2,000 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    location: walkway to primary crusher operator station  on or about: 10/22/15    a) Debris including dirt, rock, concrete and a sling were located on the walkway. This condition exposes the employees to the hazard of tripping and falling into the primary crusher or to the ground, 16 feet below the walkway.
Recent events (3)
  • — J (O) $2000
  • — C (S) $7000
  • — Z (S) $7000

1910.23 C02

Other-than-serious 1 instance 3 exposed
Issued
Apr 13, 2016
Abate by
Feb 17, 2017
Penalty
Initial $7,000 · Current $2,000 Reduced
29 CFR 1910.23(c)(2): Runways four feet or more above floor or ground level were not guarded by standard railings (or the equivalent) and toeboards:Note:  Toeboards are only required where tools, machine parts, or materials are likely to be used on the runway.    location: walkway to primary crusher operator station  on or about: 10/22/15    a) The walkway, used by employees to access the operator station,  was not provided with an adequate guardrail system. This condition exposes the employees to the hazard of falling 16 feet to the ground below.
Recent events (3)
  • — J (O) $2000
  • — C (S) $7000
  • — Z (S) $7000

1910.23 C03

Other-than-serious 1 instance 3 exposed
Issued
Apr 13, 2016
Abate by
Feb 17, 2017
Penalty
Initial $7,000 · Current $0 Reduced
29 CFR 1910.23(c)(3): Regardless of height, open-sided floors, walkways, platforms, or runways above or adjacent to dangerous equipment, pickling or galvanizing tanks, degreasing units, and similar hazards were not guarded with a standard railing and toe board.      location: walkway to primary crusher operator station  on or about: 10/22/15    a) The walkway, used by employees to access the operator station, was not provided with an adequate guardrail system. This condition exposes the employees to the hazard of falling into the primary crusher that is located below the walkway.
Recent events (3)
  • — J (O) $0
  • — C (S) $7000
  • — Z (S) $7000

1910.176 B

Deleted Serious Gravity 5 1 instance 6 exposed
Issued
Apr 13, 2016
Abate by
May 9, 2016
Penalty
Initial $5,500 · Current $0 Reduced
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse:  location: throughout site on or about: 10/22/15  a) Raw materials are stored in piles up to 60 feet high, prior to getting processed. Large rock boulders and concrete pieces on the piles could roll or slide down into the work area. Finished product is stored at an unstable angle.This condition exposes the employees to the hazard of being struck by the rock and concrete.
Recent events (3)
  • — J (S) $0
  • — C (S) $5500
  • — Z (S) $5500

View Tilcon NEW York INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341090520.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.