Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARTINEZ WESTERN CONSTRUCTORS LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MARTINEZ WESTERN CONSTRUCTORS LLC in 500 E COLORADO, TELLURIDE, CO 81435 (NAICS 238110). OSHA activity number 341109882.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Martinez Western Constructors LLC — free Get an email when a new federal OSHA severe-injury report for Martinez Western Constructors LLC is published. One employer, no account, unsubscribe in one click.
Site address
500 E COLORADO
City
TELLURIDE
State
CO
ZIP
81435
Mailing
335 VILLAGE DRIVE, RIFLE, CO 81650
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
12
Ownership type
A

5 citations on file for this inspection.

1926.451 B02

Serious Gravity 10 1 instance 3 exposed
Issued
Jan 21, 2016
Abate by
Jan 29, 2016
Penalty
Initial $3,080 · Current $1,800 Reduced
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide:    a) On or about December 9, 2015, and at times prior, one or more employees were exposed to fall hazards while working 7 feet 7 inches above frozen ground from a 9.25 inch wide scaffold plank without fall protection.       Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $1800
  • — Z (S) $3080

1926.451 B05 II

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 21, 2016
Abate by
Feb 2, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.451(b)(5)(ii): The end of a platform greater than 10 feet in length extended over its support more than 18 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilivered end.  a) On or about December 9, 2015, and at times prior, one or more workers were exposed to falling from a scaffold plank with cantilevered ends of approximately 2 feet on each end.  Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 E01

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 21, 2016
Abate by
Feb 2, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used:  a) On or about December 9, 2015, and at times prior, one or more workers were exposed to slip or fall hazards while using form sections for access at each end of a scaffold.   Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.652 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Jan 21, 2016
Abate by
Jan 29, 2016
Penalty
Initial $1,760 · Current $0 Reduced
29 CFR 1926.65(k)(1): Daily inspections were not made by a competent person of the excavation, adjacent area and protective systems.     a) On or about December 9, 2015, and at times prior, workers were exposed to cave-in hazards while working directly at the base of excavated walls more than 6 feet deep in class C soil with a slope angle greater than 1.5 to 1 (34 degrees).      Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $1760

1926.701 B

Serious Gravity 10 1 instance 3 exposed
Issued
Jan 21, 2016
Abate by
Jan 29, 2016
Penalty
Initial $3,080 · Current $1,800 Reduced
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement:    a) On or about December 9, 2015, and at times prior, workers were exposed to impalement hazards while working near and above exposed, unprotected rebar.       Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $1800
  • — Z (S) $3080

View Martinez Western Constructors LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341109882.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.