FOLCROFT, PA —
OSHA Inspection: NORTH AMERICAN MACHINE WORKS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of NORTH AMERICAN MACHINE WORKS, INC. in 789 ASHLAND AVE, FOLCROFT, PA 19032 (NAICS 332710). OSHA activity number 341136083.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTH AMERICAN MACHINE WORKS, INC.
- Site address
- 789 ASHLAND AVE
- City
- FOLCROFT
- State
- PA
- ZIP
- 19032
- Mailing
- 789 ASHLAND AVENUE, FOLCROFT, PA 19032
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 34
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.107 B09
- Issued
- Jun 13, 2016
- Abate by
- Jun 30, 2016
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction: a. Valve Repair Shop, Spray Booth - The employer did not ensure that all the sides of the spray paint booth were kept free from the storage of materials, such as, wooden skids and spray cans. Employees were exposed to a fire hazard leading to burns. On or About December 15, 2015
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.212 A01
- Issued
- Jun 13, 2016
- Abate by
- Aug 12, 2016
- Penalty
- Initial $2,625 · Current $1,838 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or About December 15, 2015, operators using lathes, drilling and milling machines to repair valves were exposed to rotating parts without the use of any machine guarding methods: a. Machine Shop - Monarch lathe (Monarch Machine Tool Company, 404.63 USE-739) b. Machine Shop - Giddings and Lewis Horizontal Boring Drilling and Milling Machine (Giddings and Lewis Machine Tool Co., 51179) c. Machine Shop - GMC 40180H, Serial Number 166 lathe d. Machine Shop - Timemaster Model CZ6266 lathe e. Machine Shop - Okuma Type LS, Serial Number 4109-10311 Lathe f. Machine Shop - Victor Lathe g. Valve Repair Shop - Voest Lathe h. Valve Repair Shop - The Maxturn Max-Deluxe Lathe (Serial Number BND 8003984,1980)
Recent events (2)
- — I (S) $1837.5
- — Z (S) $2625
1910.147 C06 II
- Issued
- Jun 13, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a. Machine and Valve Shops - The employer did not certify that periodic inspections of the energy control procedures for machines such as, but not limited to lathes, drills, etc. had been performed. Observed On or About December 15, 2015
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 IV
- Issued
- Jun 13, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a. Machine and Valve Shops - The employer did not certify that the employees performing servicing machines such as, but not limited to lathes, drills, etc. had received training on the employer's energy control procedures. Observed On or About December 15, 2015
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 F02
- Issued
- Jun 13, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a. Valve Repair Shop - The employer did not mark the electrical disconnect for the Voest lathe to indicate its purpose. Observed On or About December 15, 2015 b. Valve Repair Shop - The employer did not mark the electrical disconnect for the Maxturn Max-Deluxe lathe (Serial Number BND 8003984) to indicate its purpose. Observed On or About December 15, 2015
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at North American Machine Works, INC.
View North American Machine Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341136083.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.