MANHEIM, PA —
OSHA Inspection: DENT WIZARD INTERNATIONAL CORPORATION
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of DENT WIZARD INTERNATIONAL CORPORATION in 1190 LANCASTER RD, MANHEIM, PA 17545 (NAICS 811121). OSHA activity number 341140432.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Dent Wizard International Corporation — free
Get an email when a new federal OSHA severe-injury report for Dent Wizard International Corporation is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- DENT WIZARD INTERNATIONAL CORPORATION
- Site address
- 1190 LANCASTER RD
- City
- MANHEIM
- State
- PA
- ZIP
- 17545
- Mailing
- 4710 EARTHCITY EXPRESSWAY ATTN: SUE SCOTT, MANAGER HEALTH AND SAFETY, BRIDGETON, MO 63044
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 47
- Ownership type
- A
Citations
23 citations on file for this inspection.
1910.106 E07 I A
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $4,000 · Current $2,400 Reduced
2460
General-duty citation text
29 CFR 1910.106(e)(7)(i)(a): All electrical wiring and equipment was not installed according to the requirements of Subpart S of this part: (a) Dent Wizard International Corporation: Huts A & B - Equipment, such as the fluorescent lights, receptacles and breaker boxes, were not rated for a Class I location, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $2400
- — C (S) $4000
- — Z (S) $4000
1910.303 G02 II
- Issued
- Jun 1, 2016
- Penalty
- Initial $0 · Current $0
E200
General-duty citation text
29 CFR 1910.303(g)(2)(ii): In locations where electric equipment was likely to be exposed to physical damage, enclosures or guards were not so arranged and of such strength as to prevent such damage: (a) Dent Wizard International Corporation; Huts A and B - The fluorescent lights located on the wall were not protected from accidental breakage from the tires being lifted onto the stands, on or about December 14, 2015. No abatement certification or documentation required.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.307 C
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
E200
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: (a) Dent Wizard International Corporation: Wheel Repair Area - The fluorescent lights, receptacles and breaker box were not rated for a Class II location, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.106 E09 III
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $4,000 · Current $2,400 Reduced
2460
General-duty citation text
29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily: (a) Dent Wizard International Corporation: Wheel Repair Area Huts A and B - Combustible waste residue from wiping the wheels with flammable liquids were kept in open-topped plastic trash containers, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $2400
- — C (S) $4000
- — Z (S) $4000
1910.107 G03
- Issued
- Jun 1, 2016
- Penalty
- Initial $0 · Current $0
2460
General-duty citation text
29 CFR 1910.107(g)(3): Residue scrapings and debris contaminated with residue were not immediately removed from the premises and properly disposed. Approved metal waste cans were not provided wherever rags or waste were impregnated with finishing material; and all such rags or waste were not deposited therein immediately after use. The contents of waste cans were not properly disposed of at least once daily or at the end of each shift: (a) Dent Wizard International Corporation: Trailer Number Two - Combustible waste residue from the spray painting operation was kept in an open-topped plastic trash container, on or about December 14, 2015. No abatement certification or documentation required.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.132 A
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $4,000 · Current $2,400 Reduced
1377
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: (a) Dent Wizard International; Wheel Repair Area - Employees using paints that contained aliphatic polyisocyanates were not provided with protective coveralls and head covers, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $2400
- — C (S) $4000
- — Z (S) $4000
1910.132 D01
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) Dent Wizard International Corporation; Wheel Repair Area - The employer did not assess the workplace to determine if eye protection was necessary for employees using thinner and paints that contained aliphatic polyisocyanates, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.133 A01
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: (a) Dent Wizard International Corporation; Wheel Repair Area - Employees were not required to wear eye protection when spray painting wheels, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
137113772460
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: (a) Dent Wizard International Corporation; Wheel Repair Area - Employees using paints containing aliphatic polyisocyanates and "PNT10 FAST LACQUER THINNER" were not provided with an eyewash station, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 D01 III
- Issued
- Jun 1, 2016
- Penalty
- Initial $3,000 · Current $1,800 Reduced
13772460
General-duty citation text
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form: (a) Dent Wizard International Corporation; Wheel Repair Area - The employer did not identify and evaluate the respiratory hazards in the workplace, on or about December 14, 2015. No abatement certification or documentation required.
Recent events (3)
- — F (S) $1800
- — C (S) $3000
- — Z (S) $3000
1910.134 D03 III B 2
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377
General-duty citation text
29 CFR 1910.134(d)(3)(iii)(B)(2): The employer did not implement a change schedule for respirators not equipped with an End of Service Life Indicator that would ensure cartridges were changed before the end of their service life: (a) Dent Wizard International Corporation- The employer 's written Respiratory Protection Program did not include a change schedule to ensure that cartridges were changed before the end of their service life, or about April 12, 2016. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 E01
- Issued
- Jun 1, 2016
- Penalty
- Initial $0 · Current $0
13772460
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: instance description changed - see fsa (a) Dent Wizard International Corporation: Wheel Repair Area - The employer did not provide a medical evaluation before seven (7) employees were required to wear a respirator," on or about December 14, 2015. No abatement certification or documentation required.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
13772460
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) was used, and at least annually thereafter: (a) Dent Wizard International Corporation: Wheel Repair Area - Six (6) employees who were required to use tight-fitting face-piece respirators were not fit-tested prior to initial use of the respirator, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 G01 I A
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: (a) Dent Wizard International Corporation; Wheel Repair Area - Respirators with tight-fitting facepieces were worn by two (2) employees who had facial hair that came between the sealing surface of the facepiece and the face of the employees, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 H02 I
- Issued
- Jun 1, 2016
- Penalty
- Initial $0 · Current $0
1377
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve: (a) Dent Wizard International Corporation; Wheel Repair Area - Respirators left hanging in the painting trailers or setting on equipment and tables inside the huts were not protected from contamination, on or about December 14, 2015. No abatement certification or documentation required.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 K03
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: (a) Dent Wizard International Corporation- The employer did not provide respirator training prior to requiring employees to use the respirators in the workplace, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.1200 F05
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $4,000 · Current $2,400 Reduced
20372460
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the chemical contained therein and the appropriate hazard warnings: (a) Dent Wizard International Corporation; Wheel Repair Area - The bottles of "PNT10 Fast Lacquer Thinner" and "AM900 Aeromax Prekleano" did not contain the appropriate hazard warning, on or about December 14, 2015. (b) Dent Wizard International Corporation; Wheel Repair Area - The gun cleaner was not labeled with the identity of the chemical contained therein, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $2400
- — C (S) $4000
- — Z (S) $4000
1910.1200 H01
- Issued
- Jun 1, 2016
- Abate by
- Jul 21, 2016
- Penalty
- Initial $0 · Current $0
1377E200
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided with effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) Dent Wizard International Corporation - The employer did not provide employee training on the hazardous chemicals used in the workplace, such as "DH57 Normal Hardner", "PNT10 Fast Lacquer Thinner," "AM900 Aeromax Prekleano," and the Class II combustible dust generated from sanding on wheels, on or about December 14, 2015. (b) Dent Wizard International Corporation - Employees were exposed to chemicals, such as flammable solvents and combustible dust, and the employer did not provide employees with training on the revised hazard communication standard (HCS 2012) label elements and the new format and type of information on each section of the safety data sheets (SDSs) to ensure that when employees begin to see HCS 2012 compliant labels and SDSs in their workplace, employees understand how to use the labels and SDSs and access the information effectively, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.22 A01
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
E200
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. (a) Dent Wizard International Corporation; Huts A and B - There was dust on equipment, such as the fluorescent lights, shelves, receptacles and breaker box, which were not rated for a Class II location, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.134 M02 II
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
13772460
General-duty citation text
29 CFR 1910.134(m)(2)(ii): Fit test records were not retained for respirator users until the next fit test was administered: (a) Dent Wizard International Corporation: Wheel Repair Area - The employer did not retain fit test records for seven (7) employees who were required to use tight-fitting face-piece respirators until the next fit test was administered, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.141 D02 II
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(d)(2)(ii): Lavatories were not provided with hot and cold, or tepid running water: (a) Dent Wizard International Corporation; Wheel Repair Area - The porta potty was not provided with hot and cold, or tepid running water, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.141 D02 III
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377H130
General-duty citation text
29 CFR 1910.141(d)(2)(iii): Lavatories were not provided with hand soap or similar cleansing agent: (a) Dent Wizard International Corporation; Wheel Repair Area - The porta potty was not provided with hand soap or similar cleansing agent, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.141 D02 IV
- Issued
- Jun 1, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $0 · Current $0
1377H130
General-duty citation text
29 CFR 1910.141(d)(2)(iv): Lavatories were not provided with individual hand towels or sections thereof, of cloth or paper, warm air blowers or clean individual sections of continuous cloth toweling: (a) Dent Wizard International Corporation; Wheel Repair Area - The porta potty was not provided with individual hand towel or warm air blowers, on or about December 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Dent Wizard International Corporation
Sep 28, 2020
HENDERSON, NV
Feb 25, 2020
SOUTH BURLINGTON, VT
Mar 7, 2019
SAN ANTONIO, TX
Nov 29, 2016
PHOENIX, AZ
May 27, 2016
LAS VEGAS, NV
View Dent Wizard International Corporation's full OSHA safety record →
More inspections in this industry (NAICS 811121)
Jul 16, 2026
111612 - Gerber Collision Midwest DBA Gerber Collision - GL · MELROSE, MN
Jul 15, 2026
Seneca Foods Corporation · RIPON, WI
Jul 13, 2026
317744734 - ATC Autobody & Paint LLC · PORTLAND, OR
Jul 8, 2026
Buds Body Shop Supply & Paint · SUMMIT, IL
Jul 8, 2026
WA317991990 - Glass Works PRO INC · PUYALLUP, WA
More inspections in PA
Jul 17, 2026
FOX Tapping INC. · COLUMBIA, PA
Jul 17, 2026
Columbia Water CO · COLUMBIA, PA
Jul 17, 2026
NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA
Jul 16, 2026
Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA
Jul 16, 2026
Center City Construction and Development, LLC · PHILADELPHIA, PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341140432.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.