Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PROTECH AUTO GROUP, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PROTECH AUTO GROUP, INC. in 1101 FOURTH AVENUE, CORAOPOLIS, PA 15108 (NAICS 811198). OSHA activity number 341171569.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Protech Auto Group, INC. — free Get an email when a new federal OSHA severe-injury report for Protech Auto Group, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1101 FOURTH AVENUE
City
CORAOPOLIS
State
PA
ZIP
15108
Mailing
1101 FOURTH AVENUE, CORAOPOLIS, PA 15108
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811198
Employees
15
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 8, 2016
Penalty
Initial $1,700 · Current $1,275 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crushed-by hazards while using automotive lifts that were not maintained and inspected.  a) Garage One, Bay 4, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, a Rotary brand two post inground automotive lift was that was leaking hydraulic oil and exhibiting signs of erratic behavior was not immediately taken out service and repaired by a qualified person.  Employees using the automotive lift were exposed to struck-by and crushed-by hazards.  b) Garages One and Two, all bays, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, automotive lifts in both garages were not inspected by a qualified lift inspector at a frequency required by the lift manufacturer or at least annually.
Recent events (2)
  • — I (S) $1275
  • — Z (S) $1700

5(a)(1)

Serious Gravity 5 2 instances 5 exposed
Issued
Mar 8, 2016
Penalty
Initial $2,040 · Current $1,530 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of hearing loss and being struck-by fragments of polyvinyl chloride (PVC) plastic pipe in the event the pipe ruptured:  a) Garage Two, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, PVC plastic piping was used in exposed above ground areas to transport compressed air at approximately 130 pounds per square inch (p.s.i.).
Recent events (2)
  • — I (S) $1530
  • — Z (S) $2040

1910.215 A01

Serious Gravity 5 2 instances 3 exposed
Issued
Mar 8, 2016
Penalty
Initial $1,360 · Current $1,020 Reduced
29 CFR 1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard(s):      a) Garage One, near Bay 4, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, the grinding wheel on the right side of a Clarke brand bench grinder was not equipped with a tongue guard.  Employees using the bench grinder were exposed to a fire hazard and struck-by hazards created by the lack of a tongue guard.  b) Garage Two, south wall, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, the grinding wheel on the right side of a Sunex Tools brand bench grinder (model number MD200KL) was not equipped with a tongue guard.  Employees using the bench grinder were exposed to a fire hazard and struck-by hazards created by the lack of a tongue guard.
Recent events (2)
  • — I (S) $1020
  • — Z (S) $1360

1910.215 A04

Serious Gravity 5 2 instances 3 exposed
Issued
Mar 8, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.215(a)(4):  Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:   a) Garage One, near Bay 4, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, the grinding wheel on the right side of a Clarke brand bench grinder was not equipped with a work rest.  Employees using the bench grinder were exposed to a caught-by hazard.    b) Garage Two, south wall, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, the work rest on the grinding wheel on the right side of a Sunex Tools brand bench grinder (model number MD200KL) was not adjusted to within 1/8th of an inch from the grinding wheel.  The gap between the work rest and the grinding wheel was approximately 1 and 1/4th inches.  Employees using the bench grinder were exposed to a caught-by hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 A02 IX

Serious Gravity 5 2 instances 3 exposed
Issued
Mar 8, 2016
Abate by
Apr 1, 2016
Penalty
Initial $1,360 · Current $1,020 Reduced
29 CFR 1910.305(a)(2)(ix):  All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard:                                     a) Body Shop, Garage Two, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, the light bulbs in light fixtures on the walls of the body shop were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard.  The light bulbs fixtures were located approximately 4 feet above the body shop floor.  Employees working in the body shop were exposed to the hazards of electric shock and cut-by hazards from broken glass in the event that the light bulbs would break.
Recent events (2)
  • — I (S) $1020
  • — Z (S) $1360

1910.303 E01 II

Other-than-serious 1 instance 3 exposed
Issued
Mar 8, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.303(e)(ii):  Markings were not provided on electrical equipment giving voltage, current, wattage, and other ratings as necessary:   a)  Body Shop, Garage Two, 1101 Fourth Avenue, Coraopolis, PA 15108:  Observed on or about January 12, 2016, electrical panel boxes located near the garage door were not equipped with markings giving the voltage, current, wattage, and other ratings as necessary.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Protech Auto Group, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341171569.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.