JAMAICA, NY —
OSHA Inspection: STYLE-BILT JEWELRY CASE CO., INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of STYLE-BILT JEWELRY CASE CO., INC. in 184-60 JAMAICA AVENUE, JAMAICA, NY 11423 (NAICS 326140). OSHA activity number 341184356.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Style-Bilt Jewelry Case CO., INC. — free
Get an email when a new federal OSHA severe-injury report for Style-Bilt Jewelry Case CO., INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- STYLE-BILT JEWELRY CASE CO., INC.
- Site address
- 184-60 JAMAICA AVENUE
- City
- JAMAICA
- State
- NY
- ZIP
- 11423
- Mailing
- 184-60 JAMAICA AVENUE, JAMAICA, NY 11423
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326140
- Employees
- 18
- Ownership type
- A
Citations
15 citations on file for this inspection.
1910.36 D01
- Issued
- Jul 1, 2016
- Abate by
- Jul 8, 2016
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 (3rd Floor) An emergency exit door was observed locked with a metal pin and latch preventing prompt egress of employees from the building in the event of a fire and/or other emergency. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.37 A04
- Issued
- Jul 1, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(4): Safeguard(s) designed to protect employees during an emergency (e.g., sprinkler systems, alarm systems, fire doors, exit lighting), were not in proper working order at all times: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 (3rd Floor) The bulbs of an emergency exit sign on the 3rd floor of the building next to the woodshop area were not functional. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D01
- Issued
- Jul 1, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to assess the workplace to determine hazards present necessitating the usage of personal protective equipment (i.e. hand protection) exposing employees to thermal hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (S) $2000
1910.138 A
- Issued
- Jul 1, 2016
- Abate by
- Jul 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes. A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to provide employees exposed to thermal burns during the application of clothmaterial to wooden jewelry display cases appropriate hand protection. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Jul 1, 2016
- Abate by
- Jul 8, 2016
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): A.) On or about Wednesday, January 6, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The point of operation of a die-cutting machine used during the production of jewelry display cases was observed missing a guard resulting in an employee sustaining injuries to the left hand. B.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The point of operation of a die-cutting machine used during the production of jewelry display cases was observed missing a guard resulting in an employee sustaining injuries to the left hand. ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (2)
- — I (S) $4200
- — Z (S) $7000
1910.213 C01
- Issued
- Jul 1, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $2,800 · Current $1,600 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 A table saw used by employees within the woodshop area during the manufacturing of jewelry display cases was observed unguarded exposing employees to amputation hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (S) $1600
- — Z (S) $2800
1910.219 D01
- Issued
- Jul 1, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 (Rear of Building) The vertical pulley of a compressed air tank located in the rear of the building was observed unguarded exposing employees to amputation hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.219 E03 I
- Issued
- Jul 1, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 (3rd Floor) The belt of a compressed air tank located in the rear of the building was observed missing a guard exposing employees to amputation hazards. ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Jul 1, 2016
- Abate by
- Jul 28, 2016
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 Compressed air used by employees for cleaning purpose was not reduced to less than 30 p.s.i. exposing employees to fire/explosion hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1904.29 B03
- Issued
- Jul 1, 2016
- Abate by
- Jul 8, 2016
- Penalty
- Initial $1,000 · Current $600 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not entered on the OSHA 300 Log and on an incident report (OSHA Form 301or equivalent) within seven (7) calendar days of receiving information that a recordable injury or illness had occurred. A.) On or about Friday, January 6, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 Within seven (7) calendar days the employer failed to enter a recordable work-related injury involving an employee on the OSHA 300 log for calendar year 2016. ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (2)
- — I (O) $600
- — Z (O) $1000
1904.39 A02
- Issued
- Jul 1, 2016
- Abate by
- Jul 8, 2016
- Penalty
- Initial $1,000 · Current $600 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours. A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to report to OSHA the in-patient hospitalization of employee within twenty-four (24) hours. ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (2)
- — I (O) $600
- — Z (O) $1000
1910.147 C07 I C
- Issued
- Jul 1, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(C): Employees whose work operations were in an area where energy control procedures were utilized were not instructed about the procedure: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to provide instructions to employees that are required to use and/or work around equipment where energy control procedures are used. ABATEMENT CERIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Jul 1, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to develop, implement and maintain a written hazard communication program for employees that are required to use hazardous chemicals such as but not limited too; F90 Flex Glue and R 2258 Resin Adhesive during the fabrication of jewelry display cases. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F05 I
- Issued
- Jul 1, 2016
- Abate by
- Jul 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to ensure chemical containers used by employees during the manufacturing of jewelry display cases were properly labeled with the identity of the hazardous chemical. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Jul 1, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: A.) On or about Friday, January 15, 2016 at 184-60 Jamaica Avenue, Hollis, NY 11423 The employer failed to provide employees that are required to use hazardous chemicals such as but not limited too; F 90 Flex Glue and R 2258 Resin Adhesive during the manufacturing of jewelry display cases effective information and training in the safe usage of hazardous chemicals. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Style-Bilt Jewelry Case CO., INC.
View Style-Bilt Jewelry Case CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326140)
Jun 9, 2026
Clark Foam Products Corporation · BOLINGBROOK, IL
Apr 30, 2026
Diversified Foam Products · SWEDESBORO, NJ
Apr 14, 2026
Pregis Innovative Packaging LLC · VISALIA, CA
Mar 27, 2026
Dart Container Corporation · CORONA, CA
Mar 26, 2026
Cryopak, INC. · EDISON, NJ
More inspections in NY
Jul 17, 2026
Sullivan County Care Center at Sunset Lake · LIBERTY, NY
Jul 17, 2026
Vergara Electrical LLC · NEW YORK, NY
Jul 17, 2026
Apple Converting, INC. · ONEONTA, NY
Jul 17, 2026
Namicela Home Solutions INC · SYRACUSE, NY
Jul 17, 2026
Cranesville Block CO., INC. · SYRACUSE, NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341184356.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.