EMMETT, ID —
OSHA Inspection: SONBYRD INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SONBYRD INDUSTRIES, INC. in 1963 HWY 52, EMMETT, ID 83617 (NAICS 321911). OSHA activity number 341187920.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SONBYRD INDUSTRIES, INC.
- Site address
- 1963 HWY 52
- City
- EMMETT
- State
- ID
- ZIP
- 83617
- Mailing
- 1963 HWY 52, EMMETT, ID 83617
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.107 C09 I
- Issued
- Mar 9, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $2,040 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.107(c)(9)(i): All metal parts of piping systems conveying flammable or combustible liquids were not properly electrically grounded in an effective and permanent manner: a) On or about January 19, 2016 and at times prior, employees were exposed to fire hazards while spraying flammable liquids in the finish area with equipment that was not electrically grounded. Abatement certification is required for this item
Recent events (2)
- — I (S) $1020
- — Z (S) $2040
1910.212 A03 II
- Issued
- Mar 9, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $1,360 · Current $680 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) On or about January 19, 2016 and at times prior, employees were exposed to caught in and struck by hazards while using the Jet Drill Press in the Carpenter Shop. Abatement certification is required for this item.
Recent events (2)
- — I (S) $680
- — Z (S) $1360
1910.213 P02
- Issued
- Mar 9, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(p)(2): Drum sanding machine(s) did not have exhaust hood(s)(or other guard, if no exhaust system(s) were required), so arranged as to enclose the revolving drum, except for that portion of the drum above the table: a) On or about January 19, 2016 and at times prior, employees were exposed to caught in and struck by hazards while using the Sand Rite drum sander in the Carpenter Shop. Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV
- Issued
- Mar 9, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $1,020 · Current $510 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv): a) On or about January 19, 2016 and at times prior, employees were exposed to shock hazards when using an extension cord attached to the building as fixed wiring in the Carpenter Shop. b) On or about January 19, 2016 and at times prior, employees were exposed to shock hazards when using an extension cord attached to the building as fixed wiring to run a Hitachi miter saw in the Assembly Area. Abatement certification is required for this item.
Recent events (2)
- — I (S) $510
- — Z (S) $1020
1910.110 F02 II
- Issued
- Mar 9, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.110(f)(2)(ii): Containers when stored inside shall not be located near exits, stairways, or in areas normally used or intended for the safe exit of people. a) On or about January 19, 2016 and at times prior, employees were exposed to fire and explosion hazards when propane containers were stored next to the exit of the finish area. Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Sonbyrd Industries, INC.
View Sonbyrd Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341187920.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.