CLEVELAND, OH —
OSHA Inspection: ADVANCE INDUSTRIES GROUP
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ADVANCE INDUSTRIES GROUP in 3636 WEST 58TH STREET, CLEVELAND, OH 44102 (NAICS 332312). OSHA activity number 341190759.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADVANCE INDUSTRIES GROUP
- Site address
- 3636 WEST 58TH STREET
- City
- CLEVELAND
- State
- OH
- ZIP
- 44102
- Mailing
- 3636 WEST 58TH STREET, CLEVELAND, OH 44102
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 22, 2016
- Abate by
- Mar 17, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about January 21, 2016, the employer did not develop or document procedures for the control of potentially hazardous energy when employees are engaged in setup and maintenance activities of a Mitsubishi Model ML30TSLVP laser cutter machine. Energy sources include, but are not limited to, laser radiation, electric, and hydraulic power.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.147 C06 I
- Issued
- Feb 22, 2016
- Abate by
- Mar 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about January 21, 2016, the employer did not conducted periodic inspections of the energy control procedures at least annually to ensure the procedures and requirements of the standards were being followed. Machines and equipment include, but are not limited to; press brakes and other machines and auxiliary equipment used in the metal manufacturing. Energy sources include, but are not limited to; electrical, pneumatic, hydraulic, and mechanical power.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I B
- Issued
- Feb 22, 2016
- Abate by
- Mar 17, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: On or about January 21, 2016, the employer did not ensure affected employees under the hazardous energy control program were instructed in the purpose and use of the energy control procedures. Affected employees operate machines and equipment including, but are not limited to; press brakes, shears, laser cutter machines, powder coating lines, paint booths, and other machines and auxiliary equipment used in metal manufacturing. Energy sources include, but are not limited to; electrical, pneumatic, hydraulic, laser radiation, and mechanical power.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.212 A01
- Issued
- Feb 22, 2016
- Abate by
- Mar 3, 2016
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about January 21, 2016, the employer did not ensure the rotating parts and flying sparks of the Mitsubishi Model ML30TSLVP laser cutter machine were guarded.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.178 L06
- Issued
- Feb 22, 2016
- Abate by
- Mar 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation: On or about January 21, 2016, the employer did not certify each forklift operators training and evaluation with the name of operator, date of training, date of evaluation, and/or identity of person performing the training
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Advance Industries Group
View Advance Industries Group's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341190759.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.