OSHA Inspection: PTE SYSTEMS INTERNATIONAL LLC

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $2,100 · Current $2,100

General-duty citation text

29 CFR 1910.252(b)(2)(i)(A): Helmets or hand shields were not used during all arc welding or arc cutting operations:   On or about February 4th, 2016, at the site located at 1950 W. 8th Avenue, Hialeah FL, 33010, employees were exposed to arc welding without the adequate face protection, such as a Welding Helmet.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment in accordance with the requirements of 29 CFR 1910.132  On or about February 4th, 2016, at the worksite located at 1950 W. 8th Avenue, Hialeah FL, 33010, employees were exposed to arc welding without skin or body protection such as welding helmet, sleeves, leather apron.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $3,780 · Current $3,780

General-duty citation text

29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replaced:  On or about February 4th, 2016, at the worksite located at 1950 W. 8th Avenue, Hialeah FL, 33010, employees were using a stud gun connected to the Arc-Welding Tru-Weld equipment has the wires exposed, exposing employees to the hazard of electrical shock.

Issued

Jun 24, 2016

Abate by

Jul 14, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:  On or about February 4th, 2016, at the worksite located at 1950 W. 8th Avenue, Hialeah FL, 33010, the employer did not keep in a clean condition the service room, kitchen, bathroom and neither the workplace in the Welding area.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  On or about February 4th, 2016, at the worksite located at 1950 W. 8th Avenue, Hialeah FL, 33010, the employer did not develop nor implement a written hazard communication program for employees who are exposed to hazardous chemicals such as, but limited to High Density Polyethylene (HDPE) and Greaserex K218.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   On or about February 4th, 2016, at the worksite located at 1950 W. 8th Avenue, Hialeah FL, 33010, the employer did not provide training or information regarding the hazards of chemicals such as, but limited to High Density Polyethylene (HDPE) and Greaserex K218.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:  On or about February 4th, 2016, at the worksite located at 1950 W. 8th Avenue, Hialeah FL, 33010, the employer did not provide adequate training or information regarding the hazards of chemicals, according with the Globally Harmonized System of Classification and Labeling of Chemicals with pictograms or representations as a part of the new SDS  and label format.