Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: WESTSIDE GALVANIZING SERVICES, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of WESTSIDE GALVANIZING SERVICES, INC. in 3520 S. RIVERVIEW, PORT ALLEN, LA 70767 (NAICS 332812). OSHA activity number 341252534.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Westside Galvanizing Services, INC. — free Get an email when a new federal OSHA severe-injury report for Westside Galvanizing Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3520 S. RIVERVIEW
City
PORT ALLEN
State
LA
ZIP
70767
Mailing
3520 S. RIVERVIEW, PORT ALLEN, LA 70767
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332812
Employees
60
Ownership type
A

7 citations on file for this inspection.

5(a)(1)

Deleted Serious Gravity 10 2 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Jul 11, 2016
Penalty
Initial $4,900 · Current $0 Reduced
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that caused or were likely to cause death or serious physical harm in that employees were exposed to a struck by or crushing hazard.  Pickling Bay and Galvanizing Area:  On or about February 1, 2015, employees were exposed to a struck by or crushing hazard when operating an Yale 6 ton overhead bridge crane (serial no. unclear) with multiple hoist that did not have a locking latch on the crane hooks on west hoist #2 and east hoist #2.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4900

1910.179 B05

Other-than-serious 2 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Jul 11, 2016
Penalty
Initial $4,900 · Current $0 Reduced
29 CFR 1910.179(b)(5): Crane(s) with more than one hoisting unit did not have the rated load marked on each hoisting unit or load block:    Pickling Bay Area:  On or about February 1, 2016, the employer failed to ensure that a Yale 6 ton bridge crane (serial no. unclear) operating with four hoisting units were plainly marked with the rated load on each hoisting unit or load block.
Recent events (2)
  • — I (O) $0
  • — Z (S) $4900

1910.179 E06 I

Other-than-serious 2 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Jul 11, 2016
Penalty
Initial $4,900 · Current $0 Reduced
29 CFR 1910.179(e)(6)(i): Exposed moving part(s) which might constitute a hazard under normal operating conditions were not guarded:    Pickling Area:  On or about February 1, 2015, the employer did not ensure that the electric control brakes on east hoist #2 and west hoist #2 were equipped with a guard/cover.
Recent events (2)
  • — I (O) $0
  • — Z (S) $4900

1910.179 G02 II

Other-than-serious 2 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Jul 11, 2016
Penalty
Initial $4,900 · Current $0 Reduced
29 CFR 1910.179(g)(2)(ii): Electrical equipment was not protected from dirt, grease, oil, or moisture:    Pickling and Galvanizing Area- east hoist #2 and west hoist #2:  On or about February 1, 2015, electrical wires located near the external brakes were damaged and exposed.
Recent events (2)
  • — I (O) $0
  • — Z (S) $4900

1910.179 L03 I

Serious Gravity 10 3 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Sep 1, 2016
Penalty
Initial $4,900 · Current $3,920 Reduced
29 CFR 1910.179(l)(3)(i): Unsafe condition(s) disclosed during the frequent or periodic inspection(s) required by 29 CFR 1910.179(j) were not corrected before operation of the crane(s) was resumed:    Pickling Bay Area:  On or about February 1, 2016, the employer did not ensure that required repairs disclosed during annual inspection were corrected on the following cranes:    Instance A - 3 Ton Monorail Crane - Galvanizing Building    Instance B - 6 Ton TRE SG DD - Middle OHC    Instance C - ^ Ton TRE SG DD - South OHC
Recent events (2)
  • — I (S) $3920
  • — Z (S) $4900

1910.184 C14

Serious Gravity 10 2 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Sep 1, 2016
Penalty
Initial $4,900 · Current $3,920 Reduced
29 CFR 1910.184(c)(14): Employers used slings without affixed and legible identification markings.     Pickling/Galvanizing Area - east hoist 2/west hoist 2:  On or about February, 1, 2015, the employer did not ensure that chain slings without identification tags were removed from service.
Recent events (2)
  • — I (S) $3920
  • — Z (S) $4900

1910.184 E01

Serious Gravity 10 2 instances 2 exposed
Issued
Jun 24, 2016
Abate by
Jul 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.184(e)(1): Chain sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach:  Pickling and Galvanizing Area - east hoist 2 and west hoist 2:  On or about February 1, 2015, the employer did not ensure that the chain slings used had attached identification tags that state the size, grade, rated capacity and reach.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Westside Galvanizing Services, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341252534.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.