OSHA Inspection: OPTIPRO SYSTEMS, LLC

Issued

2016-03-08 00:00:00

Penalty

Initial $2800.00 · Current $1960.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts:     a)  Manual Machining Area, on or about 2/29/19: Hardinge Lathe, the rotating chuck was not guarded.    b) Manual Machining Area, on or about 2/29/19: Clausing Drill Press was not provided with a chuck and tool guard.    c)  Manual Machining Area, on or about 2/29/19: Bridgeport Mill was not provided with a chuck and tool guard.    d)  Manual Machining Area, on or about 2/29/19: Hyd-Mech Band Saw was not protected with a guard on the unused portion of the blade on the left side.

Issued

2016-03-08 00:00:00

Penalty

Initial $3500.00 · Current $2450.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision:    a)  Electrical Room, on or about 2/29/16: 480 volt breaker panel box had the front panel not screwed down allowing exposed energized parts to be accessible.

Issued

2016-03-08 00:00:00

Penalty

Initial $1785.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less were not readily accessible to each employee or authorized building management personnel:      a)  APD Lab, on or about 2/29/16: Access to a 120/240 volt breaker panel box was blocked by a cut off saw.

Issued

2016-03-08 00:00:00

Abate by

2016-03-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1904.32(a)(4): The annual summary of occupational injuries and illnesses (applicable portion of OSHA Form No. 300) was not posted:   a) Optipro Systems, LLC., on or about 2/29/16: The OSHA 300A for calendar year 2015 was not posted by February 1, 2016.

Issued

2016-03-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a)  Optipro Systems, LLC., on or about 2/29/16: Employer had not completed a fork lift training certificate for employees who had been trained and evaluated in fork lift operator training.