HARRISVILLE, WV —
OSHA Inspection: TROY, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TROY, LLC in 625 NORTH PENN AVE, HARRISVILLE, WV 26362 (NAICS 313230). OSHA activity number 341325397.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TROY, LLC
- Site address
- 625 NORTH PENN AVE
- City
- HARRISVILLE
- State
- WV
- ZIP
- 26362
- Mailing
- 625 NORTH PENN AVE, HARRISVILLE, WV 26362
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313230
- Employees
- 67
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.146 C04
- Issued
- Jul 8, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.146(c)(4): When the employer decided that its employees would enter permit spaces, the employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146: (a) Dalton Oven: On or about February 29, 2016, and times prior, employees are required to enter a Dalton Oven to un-jam or clean it. The oven has 480 three phase electrical and natural gas line energy sources. The employer did not implement a written permit space entry program in accordance with 29 CFR 1910.146.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.146 E01
- Issued
- Jul 8, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(e)(1): Before entry was authorized, the employer did not document the completion of measures required by 29 CFR 1910.146(d)(3) by preparing an entry permit: (a) Dalton Oven: On or about February 29, 2016, and times prior, employees are required to enter a Dalton Oven to un-jam or clean it. The oven has 480 three phase electrical and natural gas line energy sources. The employer did not document the completion of measures by utilizing an entry permit.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 H
- Issued
- Jul 8, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(h): The employer did not ensure that all authorized entrants were trained to perform the duties required by (h)(1)-(5) of this section (29 CFR 1910.146): (a) Dalton Oven: On or about February 29, 2016, and times prior, employees are required to enter a Dalton Oven to un-jam or clean it. The oven has 480 three phase electrical and natural gas line energy sources. The employer did not train the authorized entrants on the duties required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 I01
- Issued
- Jul 8, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(i)(1): The employer did not ensure that each attendant knew the hazards that could be faced during entry, including information on the mode, signs or symptoms, and consequences of the exposure: (a) Dalton Oven: On or about February 29, 2016, and times prior, employees are required to enter a Dalton Oven to un-jam or clean it. The oven has 480 three phase electrical and natural gas line energy sources. The employer did not train the authorized attendants on the hazards during entry.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jul 8, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) H5 Folder: On or about February 29, 2016, and times prior, employees feed trim through a lag roll on the H5 Folder. The employer did not provide one or more methods of machine guarding to protect the employee from the rotating parts.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1904.32 A02
- Issued
- Jul 8, 2016
- Penalty
- Initial $700 · Current $420 Reduced
General-duty citation text
29 CFR 1904.32(a)(2): The employer did not create an annual summary of injuries and illnesses recorded on the OSHA 300 Log. (a) Troy, LLC.: On or about March 14, 2016, and times prior, the 2015 OSHA form 300A, or equivalent, Summary of Work Related Injuries and Illness was not created.
Recent events (2)
- — I (O) $420
- — Z (O) $700
1904.39 A02
- Issued
- Jul 8, 2016
- Abate by
- Jul 14, 2016
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours. (a) Troy, LLC: An in-patient hospitalization of an employee injured in a work-related incident was not reported within 24 hours. The in-penitent hospitalization occurred on February 29, 2016 and OSHA was not made aware of the injury until March 7, 2016.
Recent events (2)
- — I (O) $2100
- — Z (O) $3500
More inspections at Troy, LLC
View Troy, LLC's full OSHA safety record →
More inspections in this industry (NAICS 313230)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341325397.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.