OSHA Inspection: CAMPING WORLD, INC.

Issued

May 16, 2016

Penalty

Initial $4,000 · Current $2,400 Reduced

General-duty citation text

29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible:    a.  On or about March 25, 2016 in the rear side open bay on the south table, employees were using a table top drill press that was not guarded by a barrier around the point of operation, exposing employees to cuts, bruises, and struck-by hazards.

Issued

May 16, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    a.  On or about March 25, 2016 in the rear side open bay on the south table, employees were using a Task Force 9 inch bandsaw that was not guarded to keep operator's hands away from the cutting edges, exposing employees to cuts and amputations.

Issued

May 16, 2016

Penalty

Initial $4,000 · Current $2,400 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    a.  On or about March 25, 2016, in the rear open bay on the south table, employees were using a Delta table top drill press that was not anchored, exposing employees to bruises, struck-by and crushing hazards.

Issued

May 16, 2016

Penalty

Initial $6,000 · Current $3,600 Reduced

General-duty citation text

29 CFR 1910.215(a)(2): Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard.    a.  On or about March 25, 2016 in the rear side open bay on the south table, employees were using a Porter Cable bench grinder that was missing the adjustable guard on the right side to keep operator's face, body and hands away from the spinning or exploding abrasive wheel, exposing employees to cuts, bruises, and amputations.

Issued

May 16, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  a.  On or about March 25, 2016 in the rear side open bay on the south table, employees were using a Porter Cable bench grinder that that did not have a properly adjusted work rest, exposing employees to struck by hazards.

Issued

May 16, 2016

Penalty

Initial $200 · Current $120 Reduced

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a. On or about March 25, 2016, an employee used hazardous chemicals such as, but not limited to Deltron 2000 Basecoat, Urethane Clear, and Ultra Velocity Clear while working in a mobile paint booth around the bay areas of the facility and the employer did not provide an training on the chemicals used.    Camping World, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1200(h)(1), which was contained in OSHA inspection number 987480, citation number 01, item number 03 and was affirmed as a final order on October 17, 2014, with respect to a workplace located at 14200 S. US Hwy 441, Summerfield FL 34491.

Issued

May 16, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a. On or about March 25, 2016 an employee was required to wear a half face piece respirator when working in a mobile spray paint booth around the bay areas of the facility while using Deltron 200 Basecoat, Urethane Clear, and Ultra Velocity Clear.  The employer did not implement a written respiratory protection program that addressed the worksite-specific procedures such as but not limited to employee fit testing, and training on the use, maintenance and care of the respirators.    The employer did not implement and administer an effective respiratory protection program in that they did:    1) Designate a program administrator to oversee the respiratory protection program in accordance with 29 CFR 1910.134(c)(3);    2) Provide a medical evaluation to determine the employees' ability to use a respirator in accordance with 29 CFR 1910.134(e)(1);    3) Ensure that an employee using a tight-fitting face-piece respirator is fit tested prior to initial use of the respirator in accordance with 29 CFR 1910.134(f)(2); and      4) Provide effective training to employees who are required to use respirators in accordance with 29 CFR 1910.134(k).

Issued

May 16, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a. On or about March 25, 2015, an employee used hazardous chemicals such as, but not limited to Deltron 2000 Basecoat, Urethane Clear, and Ultra Velocity Clear while working in a mobile paint booth around the bay areas of the facility and the employer did not implement at the workplace a written hazard communication program.  The employee was exposed to eye, skin and inhalation hazards.

Issued

May 16, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  a. On or about March 25, 2015, the employer did not have a safety data sheet for each hazardous chemical used by the employees such as, but not limited to Urethane Clear, and Ultra Velocity Clear.