Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CUSTOM TRUSS LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CUSTOM TRUSS LLC in 1890 WEST ATLANTIC AVENUE, DELRAY BEACH, FL 33444 (NAICS 238130). OSHA activity number 341402170.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Custom Truss LLC — free Get an email when a new federal OSHA severe-injury report for Custom Truss LLC is published. One employer, no account, unsubscribe in one click.
Establishment
CUSTOM TRUSS LLC
Site address
1890 WEST ATLANTIC AVENUE
City
DELRAY BEACH
State
FL
ZIP
33444
Mailing
1890 WEST ATLANTIC AVENUE, DELRAY BEACH, FL 33444
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
20
Ownership type
A

5 citations on file for this inspection.

1910.213 H01

Serious Gravity 10 3 instances 3 exposed
Issued
Aug 29, 2016
Abate by
Sep 9, 2016
Penalty
Initial $8,730 · Current $4,365 Reduced
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed:    On or about 4/15/2016, at the above addressed jobsite, employees are exposed to an amputation hazard while cutting wood with a radial saw without a guard.
Recent events (2)
  • — I (S) $4365
  • — Z (S) $8730

1910.213 H03

Serious Gravity 10 1 instance 1 exposed
Issued
Aug 29, 2016
Abate by
Sep 9, 2016
Penalty
Initial $8,731 · Current $4,366 Reduced
29 CFR 1910.213(h)(3): Radial saw(s) were not provided with an adjustable stop to prevent the forward travel of the blade beyond the position necessary to complete the cut in repetitive operations:    On or about 4/15/2016, at the above addressed jobsite, employees are exposed to an amputation hazard while cutting wood with a radial saw without an adjustable stop.
Recent events (2)
  • — I (S) $4365.5
  • — Z (S) $8731

1910.22 A01

Other-than-serious 1 instance 3 exposed
Issued
Aug 29, 2016
Abate by
Sep 9, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:  On or about 4/15/2016, at the above addressed jobsite, the employer did not kept in a clean condition the cutting area, exposing the employees to dust inhalation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.304 B02

Other-than-serious 1 instance 3 exposed
Issued
Aug 29, 2016
Abate by
Sep 9, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.304(b)(2): Outlet devices had an ampere rating less than the load being served:  On or about 4/15/2016, at the above addressed jobsite, employees were exposed to an electrical shock while plugging into a multiple plug power strip outlet to energize light fixtures and fan.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.305 G02 III

Other-than-serious 2 instances 3 exposed
Issued
Aug 29, 2016
Abate by
Sep 9, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  On or about 4/15/2016, at the above addressed jobsite, a flexible cord with the outer insulation of the electrical cable pull away was used to power a radial saw was not provided a strain relief.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Custom Truss LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341402170.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.