Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: THE LINK GROUP, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of THE LINK GROUP, INC. in 312 FAYETTE STREET, MANLIUS, NY 13104 (NAICS 238120). OSHA activity number 341414548.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch The Link Group, INC. — free Get an email when a new federal OSHA severe-injury report for The Link Group, INC. is published. One employer, no account, unsubscribe in one click.
Site address
312 FAYETTE STREET
City
MANLIUS
State
NY
ZIP
13104
Mailing
5209 LAKESIDE AVENUE, CLEVELAND, OH 44144
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.300 B01

Serious Gravity 5 2 instances 2 exposed
Issued
May 6, 2016
Abate by
May 18, 2016
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:    a) On or about 4/13/2016, At the jobsite:  Employees were utilizing Dewalt grinders without the use of guards.      Abatement certification is required for this item.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

1926.451 B02

Serious Gravity 5 2 instances 2 exposed
Issued
May 6, 2016
Abate by
May 18, 2016
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide:    a) On or about 4/13/2016, At the jobsite:  Employees were standing on the midrails and top rails of scissor lifts.        Abatement certification is required for this item.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.452 W06 I

Serious Gravity 5 2 instances 2 exposed
Issued
May 6, 2016
Abate by
May 18, 2016
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1926.452(w)(6)(i): Employee(s) were allowed to ride on scaffolds when the surface on which the scaffold was moved was not within 3 degrees of level, and/or not free of pits, holes, and obstructions:    a) On or about 4/13/2016, At the jobsite:  Scissor lifts were driven on a concrete surface which had openings around columns and open pits at the edge of the concrete surface.      Abatement certification is required for this item.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1926.760 A01

Serious Gravity 10 1 instance 1 exposed
Issued
May 6, 2016
Abate by
May 18, 2016
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:    a) On or about 4/13/2016, At the jobsite:  Employees performing steel erection work were not utilizing fall protection while exposed to falls of 18 feet.      Abatement documentation is required for this item.
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

1926.761 B

Serious Gravity 5 1 instance 1 exposed
Issued
May 6, 2016
Abate by
Jun 23, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.761(b): The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:  a) On or about 4/13/2016, At the jobsite:  Employees performing steel erection work were not provided with training regarding the recognition and avoidance of fall hazards.      Abatement certification is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View The Link Group, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341414548.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.