PELHAM, NH —
OSHA Inspection: WAKEFIELD THERMAL SOLUTIONS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of WAKEFIELD THERMAL SOLUTIONS, INC. in 33 BRIDGE ST., PELHAM, NH 03076 (NAICS 332410). OSHA activity number 341422095.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WAKEFIELD THERMAL SOLUTIONS, INC.
- Site address
- 33 BRIDGE ST.
- City
- PELHAM
- State
- NH
- ZIP
- 03076
- Mailing
- 33 BRIDGE ST., PELHAM, NH 03076
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332410
- Employees
- 250
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A02
- Issued
- Sep 19, 2016
- Abate by
- Sep 23, 2016
- Penalty
- Initial $8,017 · Current $4,810 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: Instance a. CNC machine #28 - On or about April 18, 2016, the Baldor bilateral bench grinder's spindle end, nut and flange were not guarded. Instance b. CNC machine #63 - On or about April 18, 2016, the orange bilateral bench grinder's spindle end, nut and flange were not guarded. Instance c. CNC machine #65 - On or about April 18, 2016, the Central Machinery bilateral bench grinder's spindle end, nut and flange were not guarded.
Recent events (2)
- — I (S) $4810
- — Z (S) $8017
1910.334 A02 II
- Issued
- Sep 19, 2016
- Abate by
- Sep 23, 2016
- Penalty
- Initial $8,017 · Current $0 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(ii): When there was a defect or evidence of damage that could expose an employee to injury, the defective or damaged item was not removed from service until the repairs and tests necessary to render the electric equipment safe had been made: a. Forklift Battery charging area - On or about April 18, 2016, the C&D ( S/N PIU790479) forklift battery charger cable was damaged, exposing employees to electrical shock hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $8017
1910.303 B02
- Issued
- Sep 19, 2016
- Abate by
- Sep 23, 2016
- Penalty
- Initial $8,017 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling: a. Production area - On or about April 18, 2016, the Staples ( Model FS-066 ME2) power strip in use to power the 55 gallon air compressor was not designed for industrial use. Wakefield Thermal Solutions Inc. was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standards 1910. 303(b)(2), which was contained in OSHA inspection number 1068298, citation number 1, item number 3a, and was affected as a final order on 7/22/2015, with respect to a workplace located at 33 Bridge St. Pelham, NH 03076.
Recent events (2)
- — I (O) $0
- — Z (S) $8017
1910.305 A02 V C
- Issued
- Sep 19, 2016
- Abate by
- Sep 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(2)(v)(C): Branch-circuit conductors were laid on the floor: Instance a. Cure Oven - On or about April 18, 2016, the ovens power conductor was laying on the floor and not protected from damage. Instance b. Manhattan heavy-duty drill press - On or about April 18, 2016, the receptacle outlet power conductor was lying on the floor and not protected from damage. Instance c. RapidAir - On or about April 18, 2016, the RapidAir (model SCL) stock cutting machine power conductor was lying on the floor and not protected from damage. Instance d. Production Product - On or about April 18, 2016, the Production Product (model TSS-9 S/N 11872) machine power conductor was lying on the floor and not protected from damage.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Sep 19, 2016
- Abate by
- Sep 23, 2016
- Penalty
- Initial $320 · Current $320
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed. Live electrical parts were exposed due to a missing knockout approximately one inch in diameter. Employees were exposed to live parts in the machine shop area: a. Main Electrical Panels Area - On or about April 18, 2016, the electrical metal junction box was not effectively closed. Wakefield Thermal Solutions Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.305(b)(1)(ii), which was contained in OSHA inspection number 1068298, citation number 1, item number 3c, and was affirmed as a final order on 7/22/2015, with respect to a workplace located at 33 Bridge St., Pelham, NH 03076.
Recent events (2)
- — I (R) $320
- — Z (R) $320
More inspections at Wakefield Thermal Solutions, INC.
View Wakefield Thermal Solutions, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332410)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341422095.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.