Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SBC, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SBC, INC. in 5073 PATTERSON ROAD, BOZEMAN, MT 59718 (NAICS 238130). OSHA activity number 341428969.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch SBC, INC. — free Get an email when a new federal OSHA severe-injury report for SBC, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SBC, INC.
Site address
5073 PATTERSON ROAD
City
BOZEMAN
State
MT
ZIP
59718
Mailing
2010 GILKERSON, BOZEMAN, MT 59715
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
84
Ownership type
A

5 citations on file for this inspection.

1926.304 F

Serious Gravity 5 2 instances 2 exposed
Issued
May 18, 2016
Abate by
Jun 14, 2016
Penalty
Initial $3,500 · Current $2,100 Reduced
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f):    (a) Residential Construction Site: On or about April 26, 2016 and at times prior, the Bosch, 10 inch circular hand-fed rip saw was not equipped with a spreader to prevent material from squeezing the saw and being thrown back on the operator.    (b) Residential Construction Site: On or about April 26, 2016 and at times prior, the Bosch, 10 inch circular hand-fed rip saw did not have a non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up material and to throw it back toward the operator.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $3500

1926.304 I01

Serious Gravity 5 1 instance 2 exposed
Issued
May 18, 2016
Abate by
Jun 14, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.304(i)(1): Each circular hand-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut:  (a) Residential Construction Site: On or about April 26, 2016 and at times prior, employees were exposed to amputation hazards while cutting material on an unguarded Bosch Model 4000 table saw.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1052 C01 II

Serious Gravity 1 1 instance 6 exposed
Issued
May 18, 2016
Penalty
Initial $2,100 · Current $1,260 Reduced
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge:    (a) Residential Construction Site: On or about April 26, 2016 and at times prior, employees were exposed to falls while using unguarded stairways to access and egress the second story of the home.
Recent events (2)
  • — I (S) $1260
  • — Z (S) $2100

1926.501 B13

Repeat Gravity 5 1 instance 2 exposed
Issued
May 18, 2016
Abate by
Jun 14, 2016
Penalty
Initial $7,000 · Current $4,200 Reduced
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system:    (a) Construction Site: On or about April 26, 2016, and at times prior, employees were exposed to a fall of approximately 20 feet to the ground below while installing drip edge flashing.    SBC, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCUPATIONAL SAFETY AND HEALTH STANDARD, WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 974231, CITATION 01, ITEM NUMBER 001 AND WAS AFFIRMED AS A FINAL ORDER ON APRIL 29, 2014, WITH RESPECT TO A WORKPLACE LOCATED AT BLACK BULL #2 BRAVEHEART LANE, BOZEMAN, MT 59715.
Recent events (2)
  • — I (R) $4200
  • — Z (R) $7000

1926.1053 B01

Repeat Gravity 5 1 instance 2 exposed
Issued
May 18, 2016
Penalty
Initial $7,000 · Current $4,200 Reduced
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access:    (a) Construction Site: On or about April 26, 2016 and at times prior, employees were exposed to a fall of approximately 12 feet while accessing and egressing the roof of the new residential home.    SBC, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCUPATIONAL SAFETY AND HEALTH STANDARD, WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 974231, CITATION 01, ITEM NUMBER 002 AND WAS AFFIRMED AS A FINAL ORDER ON APRIL 29, 2014, WITH RESPECT TO A WORKPLACE LOCATED AT BLACK BULL #2 BRAVEHEART LANE, BOZEMAN, MT 59715.
Recent events (2)
  • — I (R) $4200
  • — Z (R) $7000

View SBC, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341428969.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.