GRENADA, MS ·
OSHA Inspection: HANKINS LUMBER COMPANY, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of HANKINS LUMBER COMPANY, INC. in 496 EAST NAT G. TROUTT ROAD, GRENADA, MS 38901 (NAICS 321113). OSHA activity number 341465169.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HANKINS LUMBER COMPANY, INC.
- Site address
- 496 EAST NAT G. TROUTT ROAD
- City
- GRENADA
- State
- MS
- ZIP
- 38901
- Mailing
- P.O. BOX 1397, GRENADA, MS 38901
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 200
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.219 C02 I
- Issued
- Oct 18, 2016
- Abate by
- Oct 28, 2016
- Penalty
- Initial $5,451 · Current $2,900 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: (a) Boiler Room, Southwest Side - On or about May 12, 2016 a rotating shaft located at the motor on the backside of the under air fire fan lacked a guard exposing an employee to he hazard of being entangled in the rotating shaft.
Recent events (2)
- · I (S) $2900
- · Z (S) $5451
1910.219 D01
- Issued
- Oct 18, 2016
- Abate by
- Oct 28, 2016
- Penalty
- Initial $5,451 · Current $3,100 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Kiln No. 2, Control Room - On or about May 5, 2016 air compressor with rotating belt and pulley was not guarded (b) Boiler Room, Southwest Side - On or about May 12, 2016 there was a unguarded belt and pulley at the backside under air fire fan.
Recent events (2)
- · I (S) $3100
- · Z (S) $5451
1910.219 E01 I
- Issued
- Oct 18, 2016
- Abate by
- Oct 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: (a) Kiln No. 2, Control Room - On or about May 5, 2016 air compressor with rotating belt and pulley was not guarded (b) Boiler Room, Southwest Side - On or about May 12, 2016 there was a unguarded belt and pulley at the backside under air fire fan.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.305 G01 IV B
- Issued
- Oct 18, 2016
- Abate by
- Oct 28, 2016
- Penalty
- Initial $4,089 · Current $3,200 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables may not be used where run through holes in walls, ceilings or floors: (a) Kiln No. 2, Control Room - On or about May 13, 2016 flexible cords were being run through metal wall.
Recent events (2)
- · I (S) $3200
- · Z (S) $4089
1910.1200 E01
- Issued
- Oct 18, 2016
- Abate by
- Jan 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Chemical Room - On or about May 12, 2016 the employer had not developed and documented a written hazard communication program for employees using chemicals such as, but not limited to, Chem Aqua, oxygen, acetylene, gasoline and diesel.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Hankins Lumber Company, INC.
View Hankins Lumber Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341465169.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.