ROCHESTER, NY —
OSHA Inspection: ACRO INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ACRO INDUSTRIES, INC. in 554 COLFAX STREET, ROCHESTER, NY 14606 (NAICS 332322). OSHA activity number 341522654.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACRO INDUSTRIES, INC.
- Site address
- 554 COLFAX STREET
- City
- ROCHESTER
- State
- NY
- ZIP
- 14606
- Mailing
- 554 COLFAX STREET, ROCHESTER, NY 14606
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 140
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jul 26, 2016
- Penalty
- Initial $5,400 · Current $4,050 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 06/03/16 in the CNC area; employees changed dies on the Amada, Pacific and DiAcro brake presses without using the #4 written energy control procedure exposing them to caught between hazards. b) On or about 06/03/16 in the Press Room; employee changed dies on the Niagara, Minister and Bruderer power presses without using the #1 written energy control procedure, exposing them to caught between hazards. c) On or about 06/03/16 in the Tool Room; employees changed, set up and adjusted the Trumpf laser cutting machines without using the #2 & #3 energy control procedures, exposing them to caught between hazards. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $4050
- — Z (S) $5400
1910.212 A01
- Issued
- Jul 26, 2016
- Abate by
- Dec 23, 2016
- Penalty
- Initial $4,500 · Current $3,375 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from caught between hazard created by a moving object and a stationary object (e.g punch and die for the press brakes and power presses and the top moving electrode and the bottom stationary electrode) ; a) On or about 06/03/16 in the CNC area; employee used the Amada, Pacific, Diarco, and Trumpf, brand brake presses to form metal without a guarding device or method exposing them to the caught between hazards of the point of operation, i.e. the die and the bed. b) On or about 06/03/16 in the Press Room; employees accessed the unguarded back of Minster Press #10 and placed spray bottles containing lubricant and oils exposing them to the caught between hazard of the point of operation, i.e die and bed. c) On or about 07/25/16 in the 700 Building; employees used the spot welders, such as but not limited to Taylor-Winfield brand marked W5, without a guarding device exposing them to caught between hazards of the point of operation, i.e top moving electrode and the bottom stationary electrode. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $3375
- — Z (S) $4500
More inspections at Acro Industries, INC.
View Acro Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341522654.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.