OSHA Inspection: DCG ROOFING SOLUTIONS, INC.

Issued

Jun 15, 2016

Abate by

Jun 21, 2016

Penalty

Initial $4,400 · Current $3,960 Reduced

General-duty citation text

29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system.        a) On or about June 14, 2016, employees were not protected from the hazard of falling while engaged in roofing activities on a first story roof deck having an elevation of between 11 and 12 feet.    DCG Roofing Solutions, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501 (b)(10) which was contained in OSHA inspection number 98905, citation 1, item 1a, and was affirmed as a final order on October 13, 2011, with respect to a worksite located at 420 W. Dempster, Mount Prospect, Illinois.         In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.