Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PANEL TRUSS - HEARNE, LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of PANEL TRUSS - HEARNE, LLC in 407 WEST 6TH STREET, HEARNE, TX 77859 (NAICS 321214). OSHA activity number 341562502.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Panel Truss - Hearne, LLC — free Get an email when a new federal OSHA severe-injury report for Panel Truss - Hearne, LLC is published. One employer, no account, unsubscribe in one click.
Site address
407 WEST 6TH STREET
City
HEARNE
State
TX
ZIP
77859
Mailing
407 WEST 6TH STREET, HEARNE, TX 77859
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
Yes
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321214
Employees
65
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 5 exposed
Issued
Sep 20, 2016
Penalty
Initial $9,603 · Current $6,722 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees working with a finish press roller without the safety bar and limit switches checked daily, exposing the employees to the hazard of being caught and pulled into the rollers.    On or about 18 June 2016, and at times prior thereto, employees working with an Alpine Finish Press Roller ran trusses through the machine without checking daily the functionality of the safety bar and limit switches prior to work, exposing the employees to the hazard of being caught in the machine.
Recent events (2)
  • — I (S) $6722.1
  • — Z (S) $9603

1910.22 A01

Serious Gravity 5 1 instance 65 exposed
Issued
Sep 20, 2016
Penalty
Initial $5,487 · Current $3,841 Reduced

Hazardous substances 92109211

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    On or about 20 June 2016, and at times prior thereto, the employer did not keep the shop floor clean and orderly of excessive sawdust, which had collected upon and underneath electrical components, upon an elevated bracket near a support column, and upon elevated water pipes, rafters, and support structures, exposing the employees to a flash fire hazard.
Recent events (2)
  • — I (S) $3840.9
  • — Z (S) $5487

1910.212 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Sep 20, 2016
Penalty
Initial $9,603 · Current $6,722 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.    On or about 18 June 2016, and at times prior thereto, an Alpine Finish Press did not have guarding in place to prevent employees from reaching into the rotating rollers of the press, exposing the employees to the hazard of being caught in the machine.
Recent events (2)
  • — I (S) $6722.1
  • — Z (S) $9603

1904.29 B01

Other-than-serious 2 instances 65 exposed
Issued
Sep 20, 2016
Abate by
Nov 7, 2016
Penalty
Initial $630 · Current $441 Reduced
29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not completed in the detail as required by the regulation.    At the inspection site, for calendar year 2016, the OSHA 300 Log of Work-Related Injuries and Illnesses was not completed in the detail required for column F regarding the injury or illness, parts of body affected, and object/substance that directly injured or made person ill.  a) Cases 1 and 2 did not identify which specific hand or finger was cut.  b) Cases 1 and 2 did not identify what object/substance directly caused the injury.
Recent events (2)
  • — I (O) $441
  • — Z (O) $630

View Panel Truss - Hearne, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341562502.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.