Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DONGWON AUTOPART TECHNOLOGY GEORGIA, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of DONGWON AUTOPART TECHNOLOGY GEORGIA, LLC in 475 MERIWETHER PARK DR., HOGANSVILLE, GA 30230 (NAICS 336370). OSHA activity number 341563500.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dongwon Autopart Technology Georgia, LLC — free Get an email when a new federal OSHA severe-injury report for Dongwon Autopart Technology Georgia, LLC is published. One employer, no account, unsubscribe in one click.
Site address
475 MERIWETHER PARK DR.
City
HOGANSVILLE
State
GA
ZIP
30230
Mailing
475 MERIWETHER PARK DR., HOGANSVILLE, GA 30230
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336370
Employees
260
Ownership type
A

4 citations on file for this inspection.

1910.22 B02

Other-than-serious 1 instance 7 exposed
Issued
Oct 24, 2016
Abate by
Nov 18, 2016
Penalty
Initial $12,471 · Current $0 Reduced
29 CFR 1910.22(b)(2): Permanent aisles and passageways were not appropriately marked:    (a) In the production area, the employer did not designate and appropriately mark permanent aisles and passageways to provide adequate separation for employees and material handling equipment, exposing the machine operators and other employees to a struck by hazard.
Recent events (2)
  • — I (O) $0
  • — Z (S) $12471

1910.23 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 24, 2016
Abate by
Nov 18, 2016
Penalty
Initial $4,998 · Current $3,499 Reduced
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent):      (a) In the production area, the platform for the Robotic Welder Nut Welder RR HW RO2 was not protected by a standard railing system. Employees were exposed to a fall of approximately 4 feet, 11 inches to the next lower level.
Recent events (2)
  • — I (S) $3498.6
  • — Z (S) $4998

1910.147 C04 II B

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 24, 2016
Abate by
Nov 18, 2016
Penalty
Initial $12,471 · Current $8,730 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:    (a) In the production area, the employer did not develop specific procedures for shutting down, isolating and securing energy sources when performing welding tip changes on the Robotic Welder Nut Welder, exposing employees to electrical and struck by hazards.
Recent events (2)
  • — I (S) $8729.7
  • — Z (S) $12471

1910.303 F01

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 24, 2016
Abate by
Nov 18, 2016
Penalty
Initial $8,329 · Current $5,830 Reduced
29 CFR 1910.303(f)(1): Each disconnecting means required by Subpart S of Part 1910 for motors and appliances was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    (a) In the production area, electrical disconnect boxes providing electrical power to system components of the Robotic Welder Nut Welders were not marked to identify its purpose, exposing employees to electrical hazards.
Recent events (2)
  • — I (S) $5830.3
  • — Z (S) $8329

View Dongwon Autopart Technology Georgia, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341563500.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.