Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: REINHARD BORING TECHNOLOGIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of REINHARD BORING TECHNOLOGIES, INC. in INTERSTATE 64 EAST MILE MARKER 133-134, ABRAHAM, WV 25918 (NAICS 237110). OSHA activity number 341622777.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Reinhard Boring Technologies, INC. — free Get an email when a new federal OSHA severe-injury report for Reinhard Boring Technologies, INC. is published. One employer, no account, unsubscribe in one click.
Site address
INTERSTATE 64 EAST MILE MARKER 133-134
City
ABRAHAM
State
WV
ZIP
25918
Mailing
P.O BOX 51, TIPP CITY, OH 45371
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237110
Employees
6
Ownership type
A

8 citations on file for this inspection.

1926.50 C

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 30, 2016
Abate by
Oct 20, 2016
Penalty
Initial $3,207 · Current $1,900 Reduced
29 CFR 1926.50(c): A person who has a valid certificate in first-aid training was not available at the worksite to render first-aid.     (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, employees working on the jobsite in a remote area performing work in an 15ft. excavation without adequate protection and did not have first aid training.
Recent events (2)
  • — I (S) $1900
  • — Z (S) $3207

1926.651 J02

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 11, 2016
Penalty
Initial $2,138 · Current $1,200 Reduced
29 CFR 1926.651(j)(2): Protection was not provided by placing and keeping excavated or other materials or equipment at least 2 feet (.61m) from the edge of excavations, or by the use of retaining devices that were sufficient to prevent materials or equipment from falling or rolling into excavations, or by a combination of both if necessary.     (a) Abraham, WV on Interstate 64: On or about July 15, 2016, and times prior loose rocks were located on the edge of an excavation at the access point, excavated material and a Komatsu back hoe were placed on the edge of the excavation where employees were performing boring activities.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2138

1926.652 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 13, 2016
Penalty
Initial $2,672 · Current $1,600 Reduced
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system.    (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, employees working in an excavation approximately 15ft. in depth, 30ft. in width, and 35ft. in length are not protected by an adequate protective system when operating the American Auger boring machine, when welding and cutting casings and when performing other tasks associated with installing casings for a water line.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2672

1926.651 K01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 6, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.651(k)(1): Daily inspections of excavations, the adjacent areas, and protective systems shall be made by a competent person for evidence of a situation that could result in possible cave-ins, indications of failure of protective systems, hazardous atmospheres, or other hazardous conditions. An inspection shall be conducted by the competent person prior to the start of work and as needed throughout the shift. Inspections shall also be made after every rainstorm or other hazard increasing occurrence. These inspections are only required when employee exposure can be reasonably anticipated.  (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, daily inspections of the excavation were not conducted to address hazardous conditions, such as employees performing maintenance activities in an excavation that was up to 15ft. in depth and were not protected by a protective system.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.652 G01 III

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 13, 2016
Penalty
Initial $2,672 · Current $1,600 Reduced
29 CFR 1926.652(g)(1)(iii): Employees were not protected from the hazard of cave-ins when entering or exiting the area protected by shields.      (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, a 24ft. Werner extension ladder used for entering and exiting the excavation was located on the excavation wall outside of the provided trench box approximately 15ft. from the protected area.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2672

1926.21 B02

Serious Gravity 1 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 13, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury.    (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, employees were not trained on unsafe working conditions or the procedures to be followed to minimize the hazards, as evident by employees working in a 15ft. deep excavation without adequate protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.352 D

Other-than-serious 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.352(d): Suitable fire extinguishing equipment was not immediately available in the work area(s) where welding, cutting, or heating was being performed.  (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, the only fire extinguisher on the jobsite was located at the top of the excavation, in a work truck and was not readily available when welding and cutting was being performed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 3 exposed
Issued
Sep 30, 2016
Abate by
Oct 20, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1):  The employer did not develop, implement, and maintain at the workplace a written hazard communication program which describes how the criteria specified in paragraphs (f), (g), & (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes items (i) and (ii) of this subparagraph.  (a) Abraham, WV on Interstate 64: On or about July 15, 2016 and times prior, the employer did not develop and implement a hazard communication program, did not make safety data sheets available to employees, and did not train employees on the hazards of chemicals used, such as diesel fuel, gasoline, and exposure to welding fumes.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Reinhard Boring Technologies, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341622777.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.